-
14
-
4.5 Flap and louver control
Control the flap and louver by AIRFLOW
(UP/DOWN) and
(LEFT/RIGHT) button on the wireless remote control.
(1)
Flap
Each time when you press the AIRFLOW
(UP/DOWN) button the mode changes as follows.
(2)
Louver
Each time when you press the AIRFLOW
(LEFT/RIGHT) button the mode changes as follows.
(3)
Swing
(a)
Swing flap
Flap moves in upward and downward
directions continuously.
(b)
Swing louver
Louver moves in left and right directions continuously.
(4)
Memory flap (Flap or Louver stopped)
When you press the AIRFLOW (UP/DOWN or LEFT/RIGHT) button once while the flap or louver is operating, it stops swinging
at an angle. Since this angle is memorized in the microcomputer, the flap or louver will automatically be set at this angle when the
next operation is started.
(5)
When not operating
The flap returns to the position of air flow directly below, when operation has stopped.
COOL , DRY
Remote control
display
HEAT
•
Angle of Flap from Horizontal
Approx. 10˚
Approx. 20˚
Approx. 20˚
Approx. 35˚
Approx. 30˚
Approx. 50˚
Approx. 45˚
Approx. 60˚
Approx. 60˚
Approx. 70˚
(Swing)
(Flap stopped)
Center installation
Remote control
display
Right end installation
Left end installation
•
Angle of Louver
Left Approx. 45˚
Left Approx. 45˚
Left Approx. 20˚
Left Approx. 30˚
Center
Left Approx. 20˚
Right Approx. 20˚
Center
Right Approx. 45˚
Right Approx. 20˚
Left Approx. 20˚
Center
Right Approx. 20˚ Right Approx. 30˚ Right Approx. 45˚
(Louver stopped)
(Swing)
(Spot)
(Wide)
S
In HEAT operation
S
In COOL, DRY operation
S
In HEAT operation
S
In COOL, DRY operation
Approx. 30˚
Approx. 70˚
Approx.
10˚
Approx. 30˚
