Mitsubishi Heavy Industries RCN-E-E User Manual Download Page 8

7

 -

ON - TIMER OPERATION

Operation is started at the setting time.

[EXAMPLE] If you would like to start the operation at AM 8:00

„

 

In case the ON TIMER is set while the air 
conditioner is in operation, it will be stopped 
and ready for restart at the setting time.

1 · 3

2

1

  Press ON TIMER button.

ON TIMER display 

 blinks.

2

 Press   or 

 button to adjust to AM 8:00.

Displayed time will be changed by 10 minutes by pressing the buttons.

3

  Press ON TIMER button.

•  ON TIMER display 

 changes from blinking to steady lighting and 

the setting is completed.

  (Press within 60 seconds)
  TIMER display lamp of the receiver is lit.
•  At AM 8:00, TIMER display lamp turns off and the air conditioner will 

start operating.

„

 Cancellation 

•  Press CANCEL button to turn off the TIMER display and timer is canceled.
•  After TIMER setting, if ON/OFF button is pressed before the setting time, 

TIMER display turns off and the TIMER is canceled.

„

 Time  change

  Press ON TIMER button to set again.

OFF - TIMER OPERATION

Operation is stopped at the setting time.

[EXAMPLE] If you would like to stop the operation at PM 9:00

„

 Cancellation

•  Press CANCEL button to turn off the TIMER display and timer is canceled.
•  After TIMER setting, if ON/OFF button is pressed before the setting time, TIMER display turns off and the TIMER is 

canceled.

„

 Time  change

  Press OFF TIMER button to set again.

1

  Press ON/OFF button when the air conditioner stops.

The air conditioner starts to operate.
OFF TIMER can be set only in case the air conditioner is in operation.

2

  Press OFF TIMER button.

OFF TIMER display 

 blinks.

3

 Press   or 

 button to adjust to PM 9:00.

Displayed time will be changed by 10 minutes by pressing the buttons.

4

  Press OFF timer button.

•  OFF TIMER display 

 changes from blinking to steady lighting and 

the setting is completed. (Press within 60 seconds)

  TIMER display lamp of the receiver is lit. 
•  At PM 9:00, TIMER display lamp turns off and the air conditioner will 

stops operating.

2 · 4

3

1

PROGRAM TIMER OPERATION

By setting both ON TIMER and OFF TIMER, the settings turn into PROGRAM timer mode. Operation and stopping can be 
performed at the same time of each day by setting program timer once.

„

 Cancellation

•  Press CANCEL button to turn off the PROGRAM timer 

display and timer is canceled. (Operation condition is 
kept as before the button is pressed.)

•  If  ON/OFF  button  is  pressed  during  TIMER  operation, 

TIMER display turns off and the TIMER is canceled. The 
air conditioner stops operating.

1 Set 

ON 

TIMER.

Press ON TIMER button and set the time with 

 or 

 button.

Press ON TIMER button again.

2 Set 

OFF 

TIMER.

Press OFF TIMER button and set the time with 

 or 

 button.

Press OFF TIMER button again.
Both ON TIMER and OFF TIMER are displayed. The direction of arrow 
mark changes depending on the status of operation.

 

 

 (stop) 

(operating)

2

1

„

 Changing the set time

  Press OFF TIMER button or ON TIMER button to set again.

NOTICE

The same time cannot be set for OFF TIMER and ON TIMER.

PJZ012A055̲body̲1221.indd   7

PJZ012A055̲body̲1221.indd   7

2007/12/25   17:59:09

2007/12/25   17:59:09

Summary of Contents for RCN-E-E













Reviews: