-
47
-
Hi
0.017
0.026
0.020
0.023
Air flow
Me
0.014
0.022
0.016
0.020
Lo
0.009
0.015
0.013
0.016
Model FDEN type
Table of bypass factor (FDT, FDEN, and FDKN series figures show the bypass factor when in the Powerful mode.)
Model FDT type
2.7 Selection chart
Correct the cooling and heating capacity in accordance with the conditions as follows. The net cooling and heating capacity can be
obtained in the following way.
Net capacity = Capacity shown on specification
×
Correction factors as follows.
(1)
Coefficient of cooling and heating capacity in relation to temperatures
Indoor air W.B. temperature (˚CW.B.)
ISO-T1 Standard condition
Outdoor air D.B.
temperature (˚CD.B.)
Cooling operation
Indoor air D.B.
temperature (˚CD.B.)
Heating operation
Coefficient of cooling and heating
capacity in relation to temperatures
ISO-T1 Standard condition
Outdoor air W.B. temperature (˚CW.B.)
Item
Hi
0.186
0.040
0.027
0.025
Air flow
Me
0.160
0.031
0.021
0.021
Lo
0.151
0.025
0.018
0.017
Model
FDTA151, 201
FDTA251, 301
FDTA401
FDTA501
Item
Model
FDENA151, 201
FDENA251, 301
FDENA401
FDENA501