Mitsubishi Heavy Industries eco touch RC-EX1A, Installation Manual

Page: 14 / 423

— 12 — — 13 —
[Main]
③ ⇒ ④ ⇒ ⑤
[Sub]
① ⇒ ⑥ ⇒ ⑤
5. The indication when power source is supplied
Power on and initial setting
Power on and initial setting
Set the main and sub R/C units according to the display at the power on.
(1) When the main and sub are not yet set,
① ⇒ ②
Main/sub input screen is displayed.
When tapping the [Main] or [Sub] button, initial setting starts.
If any wrong button has been tapped by mistake, the setting can be changed after the end of the initializing
operation.
(2) When the main and sub R/C units have already been set,
⑥
Ackowledge screen to continue setting is displayed.
(3) When using 2 units of RC-EX1 as the main and sub, if the first one is set for the main, the second is set for the
sub automatically.
· When only one unit of R/C is used, tap the
Main
button.
In the state of initial setting, if either one of buttons ([Main]/[Sub]) is not tapped, it keeps the
screen unchanged.
When two R/Cs are used, if either one of them is set for the main, the other is set for sub
automatically.
Caution
①
Start screen
② Min/sub set input
③
IU search on
④
IU info acquisition on