Anti Rolling Gyro
Model:MSM-37500T-A1
−
17
−
4.1 Method of operation
Please operate the
ARG
according to the procedure below.
(1) Starting
*1) If number of the Monitoring window is same as below number shown in
Table 4-1, the
ARG
is normal.
Table 4-1 Indication of the Monitoring window
Elapsed Time
Standing
0 to 45 min
45 min after
Indication
Blink number
between 107 and 114
Increase number
from 0 to107
Steady state
between 107 and 114
*2)
The
ARG
takes approximately 45 minutes to reach rated rotational speed
after turning on the remote switch.
①
“Turn ON” the power generator for the
ARG
on the ship.
②
“Turn ON” the circuit breaker switch.
③
“Turn ON” the remote switch.
*1
④
Make sure that the start check lamp is “ON”.
＜
45 minutes later
*2
＞
⑤
Make sure that the rotation rate check lamp is “ON”
⑥
Make sure that there is no unusual noise and vibration during
the
ARG
operation.
⑦
If the test run is performed on the sea, anti-rolling function
becomes effective in approximately 45 minutes after starting.
Number shown in Table 4-1
Light on
