Mitsubishi Electric XD8500U, User Manual

Page: 50 / 79

EN-50
7. Select an item you want to set by pressing the

or

button.
t 4FMFDUUIFDPMPSZPVXBOUUPBEKVTUVTJOH
COLOR.
8. Select a setting value by pressing the

or

button.
t :PVDBOFOUFSOVNCFSTCZQSFTTJOHUIFOVNCFS
buttons (0 to 9) while holding down the NUM
button on the remote control.
Repeat steps 7 to 8, if necessary.
Important:
t 5IFDPMPSUPOFNBZOPUCFEJTQMBZFEDPSSFDUMZ
depending on the setting value. Set the value within
the proper range.
Set the target values of the brightness and
chromaticity coordinates:
4. Select MEASURE by pressing the

or

button.
MEASURED DATA
MEASURE
5. Select TARGET DATA by pressing the

or

button.
6. Press the ENTER button.
MEASURE – TARGET DATA
COLOR
GAIN
x
y
RED
*
.
***
*
.
***
*
.
***
AUTO PATTERN
ON
7. Select an item you want to set by pressing the

or

button.
t 4FMFDUUIFDPMPSZPVXBOUUPBEKVTUVTJOH
COLOR.
t 8IFOZPVTFU"6501"55&3/UP0/UIFUFTU
pattern of each color is displayed.
8. Select a setting value by pressing the

or

button.
t :PVDBOFOUFSOVNCFSTCZQSFTTJOHUIFOVNCFS
buttons (0 to 9) while holding down the NUM
button on the remote control.
Repeat steps 7 to 8, if necessary.
Important:
t The color tone may not be displayed correctly
depending on the setting value. Set the value within
the proper range.
Resetting the settings
t :PVDBOSFTFUUIF4&55*/(."/6"-BOE
MEASURE settings to the factory defaults.
1. Display the MULTI-SCREEN menu.
2. Select SETTING, MANUAL or MEASURE by
pressing the

or

button.
3. Select RESET by pressing the

or

button.
4. Press the ENTER button.
Adjusting projected images (continued)
Adjusting the color variations
You can adjust the variations in the colors of the
images displayed on multiple projectors using the
menu settings.
(See page 31 for menu setting.)
Adjustment while viewing the screen
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the

or

button.
OFF COLOR MATCHING
3. Select MANUAL by pressing the

or

button.
4. Select MANUAL by pressing the

or

button.
MANUAL SETTING
5. Select SETTING by pressing the

or

button.
6. Press the ENTER button.
MANUAL – SETTING
COLOR
GAIN
SATURATION
HUE
RED
100
0
0
WHITE R
WHITE G
WHITE B
- - -
AUTO PATTERN ON
- - -
- - -
7. Select an item you want to set by pressing the

or

button.
t 4FMFDUUIFDPMPSZPVXBOUUPBEKVTUVTJOH
COLOR.
t 8IFOZPVTFU"6501"55&3/UP0/UIFUFTU
pattern of each color is displayed.
8. Select a setting value by pressing the

or

button.
Repeat steps 7 to 8, if necessary.
Adjustment using a chroma meter
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the

or

button.
OFF COLOR MATCHING
3. Select MEASURE by pressing the

or

button.
Set the measured brightness and the chromaticity
coordinates:
4. Select MEASURE by pressing the

or

button.
MEASURED DATA MEASURE
5. Select MEASURED DATA by pressing the

or

button.
6. Press the ENTER button.
MEASURE – MEASURED DATA
COLOR
Y (RELATIVE)
x
y
RED
*****
*
.
***
*
.
***