Page 24
MODELS: LT-40151 / LT-46151 / LT-52151 / LT-40153 / LT-46153 / LT-52153 / LT-46249 / LT-52249
SELF DIAGNOSTICS
To activate, press the side panel
<
ACTIVITY> + <CH
T
>
buttons at the same time and hold for 5 seconds.
The STATUS LED will then flash denoting a two digit code.
•
The number of flashes indicates the value of the MSD (tens digit) of the Error Code.
•
The flashing then pauses for approximately 1/2 second.
•
The LED then flashes indicating the value of the LSD (ones digit) of the Error Code.
•
The Error Code is repeated a total of 5 times.
Example: If the Error Code is “23”, the LED will flash two times, pause, and then flash three times.
Note:
The TV must be in “Shut Down” and the LED will probably be indicating an abnormal condition.
If the TV is switched Off, AC is removed, or a System Reset is performed, the code automatically
resets to “12” No Error. See the Error Code Log to retrieve a history of errors.
Note:
Use the front panel buttons, not the remote control.
Note:
If there is no response, the front panel may be locked by a V-Chip setting. To unlock, press and hold
<
ACTIVITY>
on the front panel for 5 seconds.
LED INDICATIONS AND SELF DIAGNOSTICS
The front panel Status LED provides an indication of the set’s operation and the possible cause of a malfunction.
STATUS LED Indication
Condition
Off
Off (standby)
Green
Power On
Slow Blink Green
Power Off with Timer Set
Fast Blink Green
Power On Booting
STATUS LED Indication
Condition
Blinking Red
Circuit Failure
NORMAL INDICATIONS
ABNORMAL INDICATIONS
(For details perform Self Diagnostics procedure.)
Side Panel
ACTIVITY
ENTER
POWER
CH
VOL
STATUS
Status LED
