9 COMPLIANCE WITH EACH REGION
9.1 Compliance with CE marking
61
9
9
COMPLIANCE WITH EACH REGION
9.1
Compliance with CE marking
CE marking
The CE marking is mandatory and must be affixed to specific products placed on the market in the European Union. When a
product complies with the requirements (directives), the CE marking must be affixed to the product. The CE marking also
applies to machines and equipment on sale in the European Union area that incorporate servo motors.
Each manual is available in different languages. For details, refer to our website or contact your local sales office.
EMC directive
The EMC directive also applies to the direct drive motor as a single unit. Therefore, the direct drive motor is designed to
comply with the EMC directive. The EMC directive also applies to machines and equipment incorporating direct drive motors.
The TM-RFM, TM-RG2M, and TM-RU2M series comply with EN61800-3 Category 3. These series are not intended to be
used on a low-voltage public network which supplies domestic premises. When used on such network, radio frequency
interference may occur. The installer must provide a guide for installation and use, including the recommended mitigation
devices.
Low-voltage directive
The low-voltage directive also applies to the direct drive motor as a single unit. The direct drive motor is designed to comply
with the low-voltage directive.
Machinery directive
The direct drive motor as a single unit falls under Article 1 2. (k), and therefore is not subject to the Machinery directive.
However, the Machinery directive does apply to machines and equipment that incorporate the direct drive motor. Please
check if the machines and equipment as a whole are in compliance.
For compliance
Be sure to perform an appearance inspection of every unit before installation. In addition, perform a final performance
inspection on the entire machine, and keep the inspection record.
Wiring
Use EN compliant products for wiring the power supply of the direct drive motor. Products that comply with EN are available
as options. For options, refer to the following.
Performing EMC tests
The EMC test of machines and devices that incorporate servo amplifiers and direct drive motors must meet electromagnetic
compatibility (immunity/emission) standards and satisfy the environment and electrical equipment specifications to be used.
For EMC directive compliance methods relating to servo amplifiers and direct drive motors, refer to "EMC Installation
Guidelines".