4
MITSUBISHI ELECTRIC
12
11
10
9
8
7
6
5
4
3
2
1
29
28
27
26
25
24
23
22
21
20
19
18
TIMER
TEMP
TIMER/TEMP.
UP
DOWN
POWER
COOL
ON/OFF
MODE
SELECT
FAN
SPEED
TIMER
MODE
DRY
FAN
HIGH
LOW
AUTO
STOP
START
TIMER / TEMP.
This button is used to
change between display of
room temperature and dis-
play of remaining timer dur-
ing "AUTO STOP" opera-
tion. Green lamps light in
selected display mode.
Remaining timer time
display
Lamps display remain-
ing timer time or room
temperature.
Lamps indicate time
remaining until timer stops
timed operation. Green
lamps corresponding to
remaining number of hours
light.
Room Temperature
display
Lamps display temperature
settings and actual room
temperatures.
●
Temperature settings;
Green lamps light.
●
Temperature in room;
Green lamps flash.
(Example display readings are for explanations
only ; actual display readings will differ.)
This button is used to
change between low and
high fan speeds. One of
two green lamps lights to
indicate fan speed in effect.
MODE SELECT button
This button is used to
change between cooling,
FAN and DRY operation
modes. One of three green
lamps lights to indicate
mode in effect.
ON / OFF button
Pushing button starts oper-
ation. Pushing again stops
operation. Green lamp
remains lit during operation
UP and DOWN buttons
●
Temperature control (While "TEMP" green
lamps is lit.)
Use UP and DOWN buttons to set desired
temperature between 18 and 29°C.
●
Timed operation (While green "TIMER"
lamp is lit.)
Use UP and DOWN buttons to set timed
operation between one and twelve hours.
TIMER MODE button
Used for selecting timed
starting or stopping. Green
lamps lights to indicate
timer mode selected.
●
Pushing UP and Down buttons together for more than two seconds will initiate "trial run" or "inspection" mode. Avoid pushing
these buttons simultaneously during normal operation. Push ON / OFF button to cancel trial run or inspection mode if initiat-
ed by accident.
●
All green lamps turn off when air conditioner is stopped.
●
Avoid operation of buttons with fingernails or other sharp objects. Sharp objects may scratch operating panel.
Attention :
Settings remain in effect until changed.
Air conditioner can be operated by simply
pushing ON /OFF button once settings
have been made.
FAN SPEED button
Display Panel
Operating Panel
●
Remote controller
SE-1.6AR.TH
SE-2AR.TH
SE-2.5AR.TH
SE-1.6AR
1
.TH
SE-1.6AR.TH-T
SE-2AR.TH-T
SE-2.5AR.TH-T
SE-1.6AR
1
.TH-T
OC281-B-1.qxp 04.2.10 2:21 PM Page 4