2 - 3 2 - 3
MELSEC-Q
2 SYSTEM CONFIGURATION
2.2 How to Check the Function Version and Software Version
This section describes how to check the function version of the QJ71AS92 and the GX
Configuration-AS software version.
(1) Checking the function version of the QJ71AS92
(a) Checking at "the SERIAL field of the rating plate" located on the side of the
module
The serial No. and function version of the module is shown in the SERIAL
field of the rating plate.
Serial No. (Upper 5 digits)
Function version
Relevant regulation standards
(b) Checking by GX Developer
The serial No. and function version of the module are displayed on the
"Production Info. List" and "Module’s Detailed Information" screens of GX
Developer.
The following explains how to check them on the "Production Info. List"
screen. (For the case of "Module’s Detailed Information", refer to Section
8.4.)
[Operating procedure]
[Diagnostics] [System monitor] Product Inf. List
[Serial No., Ver., Product No.]
• Serial No. of the module is displayed in the Serial No. column.
• Function version of the module is displayed in the Ver. column.
• Serial No. printed on the rating plate is displayed in the Production No.
column.
*1
Note that, because the QJ71AS92 does not support the production No.
display, "-" is displayed.
*1: The Production No. column display is active only when the CPU used is
a Universal model QCPU.
Downloaded from
