11
I
GB
Item 3 (Setting content)
• Display in multiple languages is possible
• Setting the range of operation limit (operation lock)
• Setting the use or non-use of each operation mode
• Setting the temperature adjustable range (maximum, minimum)
• Selecting main or sub remote controller
* When two remote controllers are connected to one group, one
controller must be set to sub.
• Setting the use or non-use of clock function
• Setting the timer type
• Contact number display in case of error
• Setting the telephone number
• Setting the use or non-use of setback amount setting
• Setting the temperature unit (°C or °F) to display
• Setting the use or non-use of the display of water temperature
3. Function Selection
Function selection of remote controller
The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when needed.
Item 1
1. Change Language
(“CHANGE
LANGUAGE”)
2. Function limit
(“FUNCTION
SELECTION”)
3. Mode selection
(“MODE SELEC-
TION”)
4. Display change
(“DISP MODE
SETTING”)
Item 2
Language setting to display
(1) Operation function limit setting (operation lock) (“LOCKING
FUNCTION”)
(2) Operation mode skip setting (“SELECT MODE”)
(3) Temperature range limit setting (“LIMIT TEMP FUNCTION”)
(1) Remote controller main/sub setting (“CONTROLLER MAIN/
SUB”)
(2) Use of clock setting (“CLOCK”)
(3) Timer function setting (“WEEKLY TIMER”)
(4) Contact number setting for error situation (“CALL.”)
(5) Temp off set setting (“TEMP OFF SET FUNCTION”)
(1) Temperature display °C/°F setting (“TEMP MODE °C/°F”)
(2) Water temperature display setting (“WATER TEMP DISP
SELECT”)
→
(Hold down the
E
button and press the
D
button for two
seconds.)
* The display cannot be changed during the test run and
the self diagnosis.
(Hold down the
E
button and press
the
D
button for two seconds.)
* The remote controller records the
setting that is made in this way.
Press the
G
button.
See [3]–1
Item 3
(Setting content)
See [3]–2. (1)
See [3]–2. (2)
See [3]–2. (3)
See [3]–3. (1)
See [3]–3. (2)
See [3]–3. (3)
See [3]–3. (4)
See [3]–3. (5)
See [3]–4. (1)
See [3]–4. (2)
Item 1
Remote Controller Function
Selection Mode
Item 2
Normal display (Display when
the unit is not running)
PAR-W21MAA
ON/OFF
TEMP.
MENU
BACK
DAY
CHECK
TEST
MONITOR/SET
CLOCK
CLEAR
ON/OFF
INITIAL SETTING
CIR.WATER
F
G
C
D
B
I
A
H
E
Change Language
(“CHANGE LANGUAGE”)
Function limit
(“FUNCTION
SELECTION”)
NOTE
Timer operation stops when the display for
remote controller function selection is
changed to the normal one.
Press the
G
button.
Press the
E
button.
Press the
D
button.
→
→
Operation function limit setting (“LOCKING FUNCTION”)
Press the
G
button.
Temperature range limit setting (“LIMIT TEMP FUNCTION”)
Mode selection
(“MODE
SELECTION”)
Display change
(“DISP MODE
SETTING”)
Press the
E
button.
Press the
E
button.
Press the
E
button.
Press the
G
button.
Press the
G
button.
Operation mode skip setting (“SELECT MODE”)
Press the
D
button.
→
→
Temperature display °C/°F setting (“TEMP MODE °C/°F”)
Press the
G
button.
Water temperature display setting (“WATER TEMP DISP SELECT”)
Press the
D
button.
→→
→
→
Remote controller main/sub setting (“CONTROLLER MAIN/SUB”)
Press the
G
button.
Timer function setting (“WEEKLY TIMER”)
Use of clock setting (“CLOCK”)
Temp off set setting (“TEMP OFF SET FUNCTION”)
→
Contact number setting for error situation (“CALL.”)
Function selection flowchart
[1] Stop the unit to start remote controller function selection mode.
→
[2] Select from item 1.
→
[3] Select from item 2.
→
[4] Make the setting. (Details are specified in item
3)
→
[5] Setting completed.
→
[6] Change the display to the normal one. (End)
Dot display
The language that is selected in
CHANGE LANGUAGE mode ap-
pears on this display. English is
set in this manual.
WT05716X01_EN.p65
6/18/09, 10:05 AM
11
