Mitsubishi Electric PURY-100TMU, Service Handbook

Page: 29 / 121

–28–
4
GROUPING REGISTRATION OF INDOOR UNITS WITH M-NET REMOTE CONTROLLER
(1) Switch function
• The switch operation to register with the remote controller is shown below:
Registration/
ordinary mode
selector switch
Registration/ordinary
mode selection switch
Switch to assign indoor
unit address
Registration switch
Confirmation switch
Delete switch
Registered mode
selector switch
Switch to assign
interlocked unit address
A
+
B
C
D
E
F
G
H
This switch selects the ordinary mode or registered mode (ordinary
mode represents that to operate indoor units).
* To select the registered mode, press the FILTER + LOUVER
button continuously for over 2 seconds under stopping state.
[Note] The registered mode can not be obtained for a while after
powering.
Pressing the
FILTER
+
LOUVER
button displays “CENTRALLY
CONTROLLED”.
This button assigns the unit address for “INDOOR UNIT ADDRESS
NO.”
This button is used for group/interlocked registration.
This button is used to retrieve/identify the content of group and
interlocked (connection information) registered.
This button is used to retrieve/identify the content of group and
interlocked (connection information) registered.
This button selects the case to register indoor units as group (group
setting mode) or that as interlocked (interlocked setting mode).
*The unit address is shown at one spot for the group setting mode
while at two spots for the interlocked setting mode.
This button assigns the unit address of “OA UNIT ADDRESS NO.”
Symbol
of switch
G
Registered mode
selector switch
E
Confirmation switch
C
Switch to assign
indoor unit address
H
Switch to assign inter-
locked unit address
D
Registration switch
A
+ FILTER
TEST RUN
Name Name of actual switch Description
of TEMP
of TIMER SET
B
Registration/
ordinary mode
selector switch
SET TEMP. ON/OFF
PAR-F27MEA-US
FILTER
CHECK TEST
CLOCK ON OFF
MODE
DRY COOL
DAILY
TIMER
CHECK
AUTO
ON CLOCK
SET TEMP. REMAINDER
NOT AVAILABLE
SENSOR
INSIDE
FILTER
TEST RUN
VENTILATION
EROR CODE
AUTO
OFF
CENTRALLY CONTROLLED
AUTO FAN
HEAT
STAND BY
DEFROST
FAN
SPEED
TIMER FAN SPEED
LOUVER VENTILATION
AIR DIRECTION
TIMER SET
F
Delete switch
LOUVER
TIMER
MODE
→
→