6
5. Operation
µ¡z,},+,.
º
Press the operation mode (
) button
2
and select the opera-
tion mode
2
.
Cooling mode
Drying mode
Fan mode
Heating mode <Only heat pump type>
Automatic (cooling/heating) mode <Only heat pump type>
Ventilation mode
Only indicated on the following condition
Wired remote controller used
LOSSNAY connected
)|xz{/3.2z|xz{/+.2}}.,/32{z|2.2z|,{.zz{
|2.¶§¸},{2,}®
q+.2}}.,/32{z|2.2z|,{.zz{|2.¶§¸},{2,}®3|
z||,..zz{/z{,2|zz{|2.}2.z|,z.zz{|2.Yz{
2|~.z.,332.¡z{/z{,|2.}3|z,{3.,}2/+.3|,z}+
»¿ 88À « -
multaneously, one for the cooling and the other for heating, the opera-
tion mode of the indoor unit that operates earlier is selected. The other
indoor units that will start the operation later cannot operate, indicating
an operation state in blinking.
In this case, please set all the indoor units to the same operation
mode.
»¼; $« Á®¯¼½¸
mode. Cannot change over to the operating mode (COOL HEAT) and
becomes a state of standby.
» ¿ « A A
unit is being done, it takes a few minutes (max. about 15 minutes) to
blow out the warm air.
»Â $ 8
« A A ª« 8 ; $ 8
A 6 ¼ A 8 ª«
into it.
Y.z/3.2z,{3.2z|
º
According to a set temperature, cooling operation starts if the room
temperature is too hot and heating operation starts if the room tem-
perature is too cold.
º
During automatic operation, if the room temperature changes and
remains 2 °C or more above the set temperature for 15 minutes, the
air conditioner switches to cooling mode. In the same way, if the room
temperature remains 2 °C or more below the set temperature for 15
minutes, the air conditioner switches to heating mode.
º
Because the room temperature is automatically adjusted in order to
ÃAA9$ A
a few degrees warmer and heating operation is performed a few de-
grees cooler than the set room temperature once the temperature is
reached (automatic energy-saving operation).
µª,/,{3.{,},..2|~
Ä
z,{,3},.,{zz/.,/,{3.{,¶
Press
button
3
to set the desired temperature.
The selected temperature is displayed
3
.
Ä
z2|{,3},.,{zz/.,/,{3.{,¶
Press
button
3
to set the desired temperature.
The selected temperature is displayed
3
.
» ®9; A«Å
Cooling/Drying:
19 - 30 °C
Heating:
17 - 28 °C
Automatic:
19 - 28 °C
» ¼8; >ÆÇÈÇ A8A
is lower or higher than the displayed temperature.
(This display does not appear on the wireless remote controller.)
µ¦3|},,},..2|~
¯
Press the Fan Speed button
5
as many times as necessary while the
system is running.
» 7 A6 ¼ 8
shown at
5
.
» ¼ É $ 9; $A«6
FAN SPEED
Display
3-speed
+
Auto
Note:
°
,|/4,{zx332+34+,x3|},,},,|}z|.,.,zx|2. z||,.,
°
)|.,xz++z2|~3},}.,3.3+x3|},,~,|,{3.,4.,|2.2++2xx,{
x{z/.,},,}z|.,{,/z.,z|.{z++,{2}+3
£ 2+,.,2}+32}}z2|~
Y[wz{0©
¡ ,|.,.,/,{3.{,zx.,,3.,3|~,{2}+z2|.,,3.2|~/z,
,~2//,23.,+3x.,{,3.2|~z,{3.2z|}.3{.}®
ª )|±0Y/z,,|{zz/.,/,{3.{,2}2~,{.3|.,.,/,{3.{,
setting.
¦ ,|.,|2.2}2|©/z,
Cooling mode
15 minutes (switches
from heating to cooling)
Set tempe2 °C
Set temperature
15 minutes (switches
from cooling to heating)
Set temperature -2 °C
Speed 1
Speed 2
Speed 3 Auto
