Mitsubishi Electric PLK-G2010R, Technical Manual

Page: 25 / 52

7-3 Adjustment of the hook positioner’s position
(1) Remove the sliding plate.
(2) Loosen the hook positioner set screw (No.4) and adjust the hook positioner (No.1) position to align the
right side of the projection (No.3) with the right side of the needle (No.2) as shown on the figure.
(3) After the adjustment, securely tighten the hook positioner set screw (No.4) and put the sliding plate
back on the sewing machine.
<1>: Hook positioner <2>: Needle <3>: Right side of hook positioner
<4>: Hook positioner set screw
<3>
<2>
<1>
0.5
～
0.8mm
<4>
- 19 -
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com