2
2
8 :
Parts Name
Quantity
Wireless remote controller
1
Remote controller holder
1
;(%<=
2
Tapping screws 3.5 × 16
2
Only use AA batteries (LR6). Replace low batteries with new AA batteries (LR6). Observe the polarity of the batteries as indicated, and insert the
#!
3 Installation
? @ # # !
? G !
K V
K
K V ; =
K " #
the user
K V
NOTES:
X G
sure that the signal from the remote controller can be received by the indoor unit from the intended instal-
lation location. When the signal receiving unit receives a signal from the remote controller, a short beeping
sound will be heard.
G Z
system (i.e., inverter light) is installed, signal interference may occur.
* Maximum signal receiving distance is approximately 7 meters (Approx. 22 feet). Signal receiving angle is
approximately 45 degrees to the right and the left from the center.
* Install the unit at least 1 meter (Approx. 3 feet) away from the TV or radio.
(If the unit is installed too close to these appliances, signal interference (picture distortion and noise) may
occur.)
? @ #
the remote controller in the holder.
1
2
3
object that has a narrow end.
Two LR6 AA batteries
Insert the negative (–) end of each
!G
the correct directions (+, –)!
2. Press the Reset button.
1. Remove the top cover, insert two LR6 AA batteries, and then
install the top cover.
B
C
A
A
Remote controller
B
Wall
C
Display panel
Top cover
