3
PAR-F27MEA
ON/OFF
˚C
˚C
FILTER
CHECK TEST
TEMP.
TIMER SET
CLOCK
→
ON
→
OFF
1
1
4
2
3
2
3
1
7
6
5
1
7
5
6
(1) On/off and operation mode selection and room temperature adjustment
When starting operation
■
Press the [ON/OFF] button
1
.
• The ON lamp
1
and display light.
NOTE
The restarting operation contents are shown below.
When you want to change the set temperature
<When you want to lower the room temperature>
■
Press the [TEMP. (
)] button
3
.
<When you want to raise the room temperature>
■
Press the [TEMP. (
)] button
3
.
• The set temperature changes 1
°
C each time the button is pressed.
The set temperature is displayed at
3
.
• The following specified temperatures can be set:
Room temperature display
During operation, the intake temperature is displayed at
4
.
- The display range is 8 to 39
°
C. When this range is exceeded, the
room temperature display flashes at 8
°
C or 39
°
C.
- When multiple indoor units are controlled, the contents of the master
indoor unit are displayed on the remote controller.
- The room temperature sensor position can be selected from “INDOOR
UNIT” and “REMOTE CONTROLLER”.
The initial setting is “INDOOR UNIT”. When you want to change the
room temperature sensor position to “REMOTE CONTROLLER”, con-
sult your dealer.
- When “no room temperature display” was selected by remote control-
ler function selection, the room temperature is not displayed.
NOTES
Cool/dry
operation
Heat operation
Auto operation
Fan
19(14) to 30
°
C
17 to 28
°
C
19 to 28
°
C
The auto and heating functions may not be installed, depending on the
outdoor unit model.
NOTE
Remote controller settings
When stopping operation
■
Press the [ON/OFF] button
1
.
• The ON lamp
1
and display go off.
When selecting the operation mode
■
Press the [Mode selection] button
2
while the air conditioner is oper-
ating.
• The setting is switched each time the button is pressed.
The operation mode is displayed at
2
.
Operation
mode
Horizontal
outlet
Temperature
setting
Wind speed
Operation
mode
Last set wind speed
Last set temperature
Last operation mode
Last setting
Horizontal
outlet
Cannot be set.
3
How to Operate
Airflow