10
D
8. INSPECTION PROCEDURE FOR MAIN DRIVE LITHIUM-ION BATTERY
1. If any abnormality, damage or defect is found after inspection, replace the main drive
battery.
1) Check if there are diagnostic trouble codes stored.
2) Check if the battery tray and frame is cracked or damaged.
3) MEASURE THE DISTANCES ON THE SHEETMETAL TRAY (DRIVE BATTERY).
Perform the measurement using the tracking gauge, convex, or other tool. The indicated
numbers are provided for reference.
Front of Vehicle
No. Measurement Point
Measured distance
Measurement
reference point
Measurement end point Dimension (mm)
1
E
A
1208.8
2
E
B
979.8
3
E
C
720.2
4
E
D
678.0
5
E
F
243.0
6
E
G
655.6
7
E
H
964.9
Vehicle inner side
Vehicle inner side
Vehicle inner side
