11
Wait two minutes!
9. MAIN DRIVE LITHIUM-ION BATTERY REMOVAL PROCEDURE
①
Turn off the power supply mode of the electric motor
Cover
Rear bumper
Rear bumper
②
Disconnect the negative terminal of the auxiliary battery.
Wait two minutes after turning off power switch
before proceeding.
Rear hatch lock will be disabled once the 12V
negative battery terminal is disconnected.
●
Wear electric insulation “personal protective equipment” such as gloves etc.,
when removing the service plug or when working on high voltage
components.
●
Do not disassemble any component of the main drive lithium-ion battery other
than those described in this manual.
Negative terminal
for 12V battery
Procedure 1
Removing Service Lid Cover
*Please use the check sheet on page 34.
Before starting procedures
Discharge Refrigerant from Battery Cooling Unit (HVAC)
