manualshive.com logo in svg

Mitsubishi Electric MXZ-2F33VF, Service Manual, Page: 88 / 94

Share
Download
Mitsubishi Electric MXZ-2F33VF Service Manual Download Page 88

OPERATING PROCEDURE

PHOTOS

5. Removing the outdoor fan motor

(1) Remove the service panel, the top panel and the cabinet 

(Refer to section1).

(2) Disconnect the power supply and indoor/outdoor connect-

ing wire.

(3) Disconnect the connectors for outdoor fan motor.
(4) Remove the propeller fan nut. 
(5) Remove the propeller fan.
(6) Remove the screws fixing the fan motor.
(7) Remove the fan motor.

6. Removing the compressor and the 4-way valve

(1) Remove the service panel, the top panel and the cabinet 
 

(Refer to section1).

(2) Disconnect the power supply and indoor/outdoor connect-

ing wire and remove the back panel (Refer to section1).

(3) Remove the inverter assembly (Refer to section2).
(4) Recover gas from the refrigerant circuit.

NOTE:

 Recover gas from the pipes until the pressure gauge 

shows 0 kg/cm

2

 (0 MPa).

(5) Detach the brazed part of the suction and the discharge 

pipe connected with compressor.

(6) Remove the nuts of compressor legs.
(7) Remove the compressor.
(8) Detach the brazed part of pipes connected with 4-way 

valve.

88

Defrost
thermistor 
(RT61)

Photo 9

Photo 8

Screws of the fan motor

Outdoor heat
exchanger
temperature
thermistor (RT68)

Propeller fan

Brazed parts of 4-way valve

Propeller fan nut

Photo 7

Base heater
(

MXZ-2F53VFH 

only)

Photo 10

Suction pipe brazed part

Discharge pipe brazed part

Compressor nuts

OBH790

Summary of Contents for MXZ-2F33VF































































































Reviews:

No comments