OPERATING PROCEDURE
PHOTOS/FIGURES
5. Removing the compressor and 4-way valve
(1) Remove the top panel, cabinet and service panel. (Refer to
section 1.)
(2) Remove the back panel. (Refer to section 1.)
(3) Remove the inverter assembly. (Refer to section 2.)
(4) Recover gas from the refrigerant circuit.
NOTE:
Recover gas from the pipes until the pressure gauge
shows 0 PSIG.
(5) Detach the brazed part of the suction and the discharge pipe
connected with compressor.
(6) Remove the compressor nuts.
(7) Remove the compressor.
(8) Detach the brazed parts of 4-way valve and pipe. (Photo 13)
Photo 12
Photo 13
44
Brazed part of
the discharge pipe
Brazed part of
the suction pipe
Discharge temperature thermistor
Brazed parts of
4-way valve
©
Copyright 2021 MITSUBISHI ELECTRIC CORPORATION
Published: Jan. 2021. No
. OBH875
Made in Japan
HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
Specifications are subject to change without notice.
