38
Vane shafts
Opening
How to remove the multi-flow
vane and the horizontal vanes
Horizontal vane (back)
Horizontal vane (front)
Unit body
Unit body
Vane shaft
Rib
Horizontal vane
(1)-3. Remove the axial rods on the both ends of the
horizontal vane from the unit body.
Top down view from the back of the unit
Rib
Vane shaft
Unit body
(2)-3. Remove the axial rod on the one end of the multi-flow
vane from the unit body.
Catch
(2) Removing the multi-flow vane
Vane shafts
Multi-flow vane
(2)-2. Insert a tool such as a precision screwdriver in the gap
between multi-flow vane and the vane shaft and lift the catch
of the vane shaft in the arrow 1 direction to detach it from the rib
on the multi-flow vane. Slide the vane shaft in arrow 2 direction
and separate it from the unit body.
Multi-flow vane
(1)-1. See the figure below and push to open the indicated
places on the horizontal vanes (between front and back)
with your fingers so that you can access 4 vane shafts
positioned on the back of the horizontal vanes.
(vane shafts on each horizontal vane)
(2)-1.Open the horizontal vanes (front and back) by following (1)-1.
Make sure that 3 vane shafts are on the back of the multi-flow vane.
(1)-2. Insert a tool such as a precision screwdriver
in the opening on the vane shaft and lift the catch
of the vane shaft in arrow 1 direction to detach it
from the rib on the horizontal vane. Slide the vane shaft
in arrow 2 direction and separate it from the unit body.
Multi-flow vane
Catch
(1) Removing the horizontal vane (front/back)
2%+%
Summary of Contents for MUFZ-KJ-NAHZ Series
Page 3: ...3 1 TECHNICAL CHANGES MFZ KJ09NA U1 MFZ KJ12NA U1 MFZ KJ15NA U1 MFZ KJ18NA U1 1 New model 2 ...
Page 7: ...7 4 OUTLINES AND DIMENSIONS MFZ KJ09NA MFZ KJ12NA MFZ KJ15NA MFZ KJ18NA Unit inch 2 ...
Page 8: ...8 MFZ KJ09NA MFZ KJ12NA MFZ KJ15NA MFZ KJ18NA 5 WIRING DIAGRAM 2 ...
Page 41: ...41 2 ...