En-14
1. Open the front panel.
Note: You cannot remove the front panel.
2. Rotate the stoppers as indicated by the arrows until they click.
3. Lower the front panel slowly and it will be held open with the stoppers.
4. Pinch the tabs on the fi lters; slightly push them up
and pull down toward you to remove the fi lters.
5. Close the front panel securely and press the posi-
tions indicated by the arrows.
6. Clean the front panel without detaching it from the
unit.
• Wipe with a soft dry cloth.
• Use the dedicated SOFT DRY CLOTH. Parts Number
MAC-1001CL-E
• Do not soak the front panel in water.
Instructions:
C
LEANING
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• Use only diluted mild detergents.
• Do not use a scrubbing brush, a hard sponge, or the like.
• Do not soak or rinse the horizontal vane.
• Do not use water hotter than 50°C.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
• Do not apply excessive force on the fan as it may cause cracks or breakage.
Air fi lter
•
Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
Important
•
Clean the fi lters regularly for best performance and to
reduce power consumption.
•
Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air fi lters
every 2 weeks.
•
Do not touch the move eye sensor.
•
The D.S.PLASMA device does not function for safety for
a couple minutes after the operation starts or the front
panel is opened/closed.
•
Do not disassemble the D.S.PLASMA device.
•
Do not touch any parts other than the frame of the
D.S.PLASMA device.
Front panel
D.S.PLASMA device
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by
vacuum cleaning:
• Soak the fi lter together with its frame in
lukewarm water and rinse it.
• After washing, dry it well in shade.
Air cleaning fi lter
(Deodorizing fi lter, black)
Every 3 months:
• Remove dirt by a vacuum cleaner, or soak the framed fi lter in lukewarm
water (30 to 40°C) for about 15 minutes. Rinse well.
• After washing, dry it well in shade.
• Deodorizing feature recovers by cleaning the fi lter.
When dirt or smell cannot be removed by cleaning:
• Replace it with a new air cleaning fi lter.
• Parts Number
MAC-3010FT-E
Important
•
The surface of the indoor unit is easily scratched, so never
rub or hit the unit with something hard. Also, when installing
or removing the front panel, handle it with care to prevent
scratches on it.
•
Do not use abrasive cleaner to prevent scratches on the sur-
face of the indoor unit.
•
It is very easy to get fi ngerprints on the surface of the indoor
unit. When fi ngerprints are noticeable, gently wipe them off
with a soft dry cloth.
•
When using a commercially available chemical impregnated
cloth, follow its instructions.
•
Do not leave the front panel open for a prolonged time.
2
3
2
3
stopper
1
1
4
4
JG79Y185H01_en.indd 14
11/29/2016 8:48:17 AM
