En-10
N
IGHT MODE OPERATION
Press
during operation to activate NIGHT mode.
• The operation indicator lamp dims.
• The beep sound will be disabled except that emitted when the opera-
tion is started or stopped.
• Noise level of the outdoor unit will be lower than that mentioned in
SPECIFICATIONS.
Press
again to cancel NIGHT mode.
Note:
• Noise level of the outdoor unit may not change after start-up of the unit, dur-
ing the protection operation, or depending on other operating conditions.
• The fan speed of the indoor unit will not change.
• The operation indicator lamp will be hard to be seen in a bright room.
• Operating POWERFUL operation during NIGHT mode will increase the noise
level of the outdoor unit.
D
. S. PLASMA OPERATION
Press
to start D.S.PLASMA operation.
• D.S.PLASMA lamp turns on. (Display section)
Press
again to cancel D.S.PLASMA operation.
• D.S.PLASMA lamp turns off. (Display section)
Note:
• Never touch the D.S.PLASMA device during operation. Although the D.S.PLASMA
device is safety-conscious design, touching this device could be the cause of
trouble as this device discharge high voltage electricity.
• A “hissing” sound may be heard during the D.S.PLASMA operation. This
sound is produced when plasma is being discharged. This is not a malfunction.
• D.S.PLASMA lamp does not turn on if the front panel is not closed com-
pletely.
In the D.S.PLASMA operation, the indoor unit built-in device reduces
airborne fungi, viruses, mold, and allergens.
NIGHT MODE changed the brightness of the operation indicator,
disables the beep sound and limits the noise level of the outdoor unit.
JG79Y185H01_en.indd 10
11/29/2016 8:48:14 AM
