En-4
Setting the installation position
Be sure to set the remote controller in accordance with the installed position of
the indoor unit.
Installation position:
Left:
Distance to objects (wall, cabinet, etc.) is less than 50 cm to the left
Center: Distance to objects (wall, cabinet, etc.) is more than 50 cm to the left
and right
Right: Distance to objects (wall, cabinet, etc.) is less than 50 cm to the right
Area
Left
Center
Right
Remote controller
display
Hold down
on the remote controller for 2 sec-
onds to enter the position setting mode.
Select the target installation position by pressing
.
(Each press of the
displays the positions in
order:)
Press
to complete the position setting.
Note:
The installation position can be set only when all the following conditions are met:
• The remote controller is powered off.
• Weekly timer is not set.
• Weekly timer is not being edited.
1
2
3
(Left) (Center)
(Right)
P
REPARATION BEFORE OPERATION
(Center)
(Right)
(Left)
JG79Y064H03_en.indd 4
5/19/2016 4:56:13 PM
