En-7
● OPERATING INSTRUCTIONS ●
T
IMER OPERATION (ON/OFF TIMER)
1
Press
or
during operation to set the timer.
(ON timer) : The unit will turn ON at the set
time.
(OFF timer) : The unit will turn OFF at the set
time.
*
or
blinks.
* Make sure that the current time is set correctly.
Page 4
2
Press
(forward) and
(backward) to set the
time of timer.
Each press changes the set time 10 minutes forward/backward.
• Set the timer while
or
is blinking.
Press
or
again to cancel timer.
Note:
• ON and OFF timers can be set together. mark indicates the order of timer
operations.
• If power failure occurs while ON/OFF timer is set, see
page 7
“Auto restart
function”.
A
UTO RESTART FUNCTION
E
MERGENCY OPERATION
When the remote controller cannot be used...
Emergency operation can be activated by pressing the emergency operation
switch (E.O. SW) on the indoor unit.
Each time the E.O. SW is pressed, the operation changes in
the following order:
If a power failure occurs or the main power is turned off during operation, “Auto
restart function” automatically starts operation in the same mode as the one set
with
the remote controller
just before the shutoff of the main power. When
timer is set, timer setting is cancelled and the unit starts operation when power
is resumed.
If you do not want to use this function, please consult the service repre-
sentative because the setting of the unit needs to be changed.
Set temperature : 75°F
(24°C)
Fan speed : Medium
Horizontal vane : Auto
Emergency COOL
Emergency HEAT
Stop
Note:
The fi rst 30 minutes of operation is test run. Temperature control does not work,
and fan speed is set to High.
Operation indicator lamp
<MSZ-GS (Heat pump)>
<MSY-GS (Cooling only)>
Emergency COOL
Stop
JG79Y767H01_01En.indd 7
2020/05/20 13:16:26
