background image

En-7

● OPERATING INSTRUCTIONS ●

Instructions:

 

C

LEANING

•  Switch off the power supply or turn off the breaker before cleaning.

•  Be careful not to touch the metal parts with your hands.

•  Do not use benzine, thinner, polishing powder, or insecticide.

•  Use only diluted mild detergents.

•  Do not expose parts to direct sunlight, heat, or fi re to dry.

•  Do not use water hotter than 50°C.

•  Do not use a scrubbing brush, a hard sponge, or the like.

•  Do not soak or rinse the horizontal vane.

•  Do not apply excessive force on the fan as it may cause cracks or breakage.

Air cleaning fi lter

(Anti-Allergy Enzyme Filter, option)

Back side of air fi lter 

Every 3 months:

•  Remove dirt by a vacuum cleaner.

When dirt cannot be removed by vacuum cleaning:

•  Soak the fi lter and its frame in lukewarm water before rinsing it.

•  After washing, dry it well in shade. Install all tabs of the air fi lter.

Every year:

•  Replace it with a new air cleaning fi lter 

for best performance.

•  Parts Number 

 MAC-408FT-E 

 

 Important

•  Clean  the  fi lters  regularly  for  best  performance  and  to  re-

duce power consumption.

•  Dirty fi lters cause condensation in the air conditioner which 

will  contribute  to  the  growth  of  fungi  such  as  mold.  It  is 

therefore recommended to clean air fi lters every 2 weeks.

Pull to remove from the air fi lter

1. Lift the front panel until a “click” is heard.
2. Hold the hinges and pull to remove as shown in the illustration above.

•  Wipe with a soft dry cloth or rinse it with water.

•  Do not soak it in water for more than two hours.

•  Dry it well in shade.

3. Install the front panel by following the removal proce-

dure in reverse. Close the front panel securely and 

press the positions indicated by the arrows.

Front panel

Hole

Hinge

Air fi lter (Nano platinum fi lter)

• 

 

Clean every 2 weeks

 

•  Remove dirt by a vacuum cleaner, or rinse with water.

•  After washing with water, dry it well in shade.

What is “Nano platinum fi lter” ?

Nano platinum is a ceramic particle that includes a platinum nanoparticle. 

The particles are incorporated into the fi lter material, which results in pro-

viding semi-permanent antibacterial and deodorizing characteristics for the 

fi lter. Nano platinum surpasses the catechin (a biofl avonoid that is found 

in green tea) in performance. Nano platinum fi lter uses this compound not 

only to improve air quality but also to eliminate bacteria and viruses. This air 

fi lter has a semi-permanent lasting effect even after washing it with water.

JG79Y270H02_en.indd   7

2017/04/28   13:33:04

Summary of Contents for MSY-GN25VF













Reviews: