background image

En-5

● OPERATING INSTRUCTIONS ●

F

AN SPEED AND 

AIRFLOW DIRECTION ADJUSTMENT

I-

SAVE OPERATION 

Press 

 to select fan speed. Each press changes 

fan speed in the following order:

• Two short beeps are heard from the indoor unit when set to AUTO.

• Use higher fan speed to cool the room more powerfully. It is recom-

mended to lower the fan speed once the room is cool.

• Use lower fan speed for quiet operation.

• Use lower fan speed to further lower the outlet temperature and hu-

midity.

Press 

 to select airfl ow direction. Each press 

changes airfl ow direction in the following order:

•  Two short beeps are heard from the indoor unit when set to AUTO.

Airflow direction

  (AUTO) .........The vane is set to the most effi cient airfl ow direction.  :horizontal 

position. 

 (Manual) .......For  efficient  air  conditioning,  select  the  upper  position  for 

COOL/DRY, and the lower position for FAN. If the lower posi-

tion  is  selected  during  COOL/DRY,  the  vane  automatically 

moves to the upward position after 0.5 to 1 hour to prevent 

any condensation from dripping.

 (Swing) .........The vane moves up and down intermittently. 

■ 

To change the horizontal airfl ow direction.

  Move the vertical vane manually before starting operation.

1

Press 

 during COOL or ECONO COOL mode to 

select i-save mode.

2

Set the temperature, fan speed, and airfl ow direction.

•  The same setting is selected from the next time by simply pressing 

 .

•  One group of setting can be saved.
•  Select the appropriate temperature, fan speed, and airflow direction 

according to your room.

Press 

 again to cancel i-save operation. 

•  i-save operation also is canceled when the MODE button is pressed.

i-save operation

A simplified set back function enables to recall the preferred (preset) setting with 

a single push of the 

 button. Press the button again and you can go back to 

the previous setting in an instance.

Example of use:

1. Low energy mode

Set the temperature 2°C to 3°C warmer in COOL. This setting is suitable for 

unoccupied room, and while you are sleeping.

2. Saving frequently used settings

Save your preferred setting for COOL/ECONO COOL. This enables you to 

select your preferred setting with a single push of the button.

  (AUTO)  (Quiet) 

(Low) 

(Med.) 

(High)  (Super High)

 (AUTO) 

(1) 

 (2) 

(3) 

(4) 

(5)  (SWING)

JG79Y270H02_en.indd   5

2017/04/28   13:33:01

Summary of Contents for MSY-GN25VF













Reviews: