9
I FEEL... AUTO OPERATION
With the “
(I FEEL...)” auto operation mode,
the optimum room condition can be set automati-
cally with a one-touch operation.
•
To start operation:
■
Press the
ON/OFF
button.
When the “
(I FEEL...)” mode is selected, the air
conditioner is automatically controlled at the optimum
temperature.
•
To stop operation:
■
Press the
ON/OFF
button.
•
If you feel slightly warm:
■
Press the
TOO
WARM
button to lower the tempera-
ture.
One press lowers the temperature by about 1
°
C.
•
If you feel slightly cool:
■
Press the
TOO
COOL
button to raise the tempera-
ture.
One press raises the temperature by about 1
°
C.
When “
(I FEEL...)” is not selected, press the
MODE
button until it is set.
Each time the button is pressed, the operation mode is
changed in sequence:
(I FEEL...)
→
→
→
→
→
(COOL)
→
→
→
→
→
(DRY)
→
→
→
→
→
(HEAT/FAN)
Description of “I FEEL...” mode
Details of operation
According to the room temperature when the operation starts,
the operation mode is automatically set to COOL, DRY or HEAT.
However, when operation is started again within 2 hours after it
is stopped, the same operation mode before the operation is
stopped is selected. The operation mode selected first is not
changed even if the room temperature changes. If the operation
mode does not match the room condition, select the appropri-
ate operation mode by pressing the
MODE
button.
Details of auto operation
NOTE
COOL: When the room temperature is 2
°
C higher than the set temperature, the set temperature may not be
changed since the air conditioner is operating to reach the target (set) temperature. In this case,
please wait until the room temperature drops to within 2
°
C of the set temperature and then change
the set temperature.
HEAT: When the room temperature is 2
°
C lower than the set temperature, the set temperature may not be
changed since the air conditioner is operating to reach the target (set) temperature. In this case,
please wait until the room temperature rises to within 2
°
C of the set temperature and then change the
set temperature.
Details of display on the indoor unit
The operation indicator at the right side of the indoor unit indi-
cates the operation state.
Operation indicator lamp
Operation state
This shows that the air conditioner is operating to reach the
target temperature. Please wait until the target temperature
is obtained.
This shows that the room temperature is approaching the
target temperature.
(In case of outdoor unit MXZ series only)
Please refer to INFORMATION FOR MULTI SYSTEM AIR
CONDITIONER (page 10). *
Indication
Difference between target
temperature and room temperature
About 2
°
C or more
About 2
°
C or less
—
Operation
Indicator
Lighting
Blinking *
Not lighting
COOL & HEAT type
COOL ONLY type
Room temperature
Operation mode
Target temperature
Operation mode
Target temperature
when started
(initial state)
(initial state)
About 25
°
C or higher
COOL
About 24
°
C
COOL
About 24
°
C
About 25
°
C - 23
°
C
DRY
—
DRY
—
About 23
°
C or lower
HEAT
About 26
°
C
DRY
—
ON/OFF
FAN
TOO
WARM
TOO
COOL
VANE
MODE
ECONO COOL
STOP
START
HR.
MIN.
I FEEL COOL
DRY
AM
PM
CLOCK
˚C
AMPM
HEAT
/FAN
RESET CLOCK
FAN
VANE
MODE
ECONO COOL
STOP
START
HR.
MIN
I FEEL COOL
DRY
HEAT
/FAN
* Except MSC-C07/C09/C12TV
