background image

17

INSTALLATION, RELOCATION AND INSPECTION

Inspection and maintenance

When the air conditioner is used for several seasons,
the capacity may be lowered due to dirt inside the
unit.

Depending on the condition, an odor may be gener-
ated or dehumidified water may not drain out
smoothly due to dirt, dust, etc.

It is recommended that the unit be inspected and
maintained (charged) by specialist in addition to nor-
mal maintenance. Consult your dealer.

Operating sound considerations

Do not put an object around the air outlet of the out-
door unit. This may lower the capacity or increase
the volume of the operating sound.

If an abnormal sound is heard during operation, con-
sult your dealer.

Relocation

When the air conditioner is to be removed or re-in-
stalled because of rebuilding, moving, etc., special
techniques and work are required.

 WARNING

Repairs or relocation should not be done by the cus-
tomer.
If this is done incorrectly, it may cause a fire, an
electric shock, or an injury from the unit falling, wa-
ter leaking, etc. Consult your dealer.

Disposal

To dispose of this product, consult your dealer.

If you have any questions, consult your dealer.

Installation place

Avoid installing the air conditioner in the following
places.

Where flammable gas could leak.

 CAUTION

Do not install the unit where flammable gas could
leak.

If gas leak and collect around the unit, it may cause an
explosion.

Where there is much machine oil.

Salty places such as the seaside.

Where sulfide gas is generated such as a hot spring.

Where oil is splashed or where the area is filled with
oily smoke.

Electrical work

Provide an exclusive circuit for the power supply of
the air conditioner.

Be sure to observe the breaker capacity.

 WARNING

The customer should not install this unit.
If installation is done incorrectly, it may cause a
fire, an electric shock, or injury from the unit fall-
ing, water leaking, etc.

Do not use intermediate connection of the power
supply cord or the extension cord and do not
connect many devices to one AC outlet.
A fire or an electric shock may result from poor
contact, poor insulation, exceeding the permis-
sible current, etc.
Consult your dealer.

 CAUTION

Earth the unit.
Do not connect the earth to a gas pipe, water pipe,
lightning rod or the earth of a telephone. If the
earthing is incorrect, it may cause an electric
shock.

Install an earth leakage breaker depending on the
place where the air conditioner is to be installed
(humid places, etc.).
If the earth leakage breaker is not installed, it may
cause an electric shock.

Keep the outdoor unit 3 m or
more away from the antennas
of TV sets or radios.

To prevent the effects
of a fiuorescent lamp,
keep as far apart as
possible.

wall, etc.

Inverter-type
fluorescent lamp

Keep a space
to prevent the
picture
distortion or
the noise.

1 m

or more

Radio

100 mm or
more

3 m

or more

Well-
ventilated
dry place

500 mm or
more

TV

Summary of Contents for MSC-07RV





















Reviews: