ASC OFF SWITCH
TSB Revision
ACTIVE STABILITY CONTROL SYSTEM (ASC)
35C-144
20.In "Learn sensor neutral position," select "Learn
neutral position of steering angle sensor," and
then press the "OK" button.
21."Learn neutral position of steering angle sensor:
Are you sure to execute the selected item? Note:
Check the execution conditions." is displayed.
Then, press the "OK" button.
22."Execute command: Executed" is displayed.
Then, press the "OK" button.
23.The neutral point is learned.
24.Turn the electric motor switch to the "LOCK"
(OFF) position, and remove scan tool from the
vehicle.
ASC OFF SWITCH
REMOVAL AND INSTALLATION
M1357003300043
INSPECTION
M1357004600014
ASC OFF SWITCH CONTINUITY CHECK
1. As shown in the figure, connect the circuit tester to the ASC
OFF switch as a single unit.
2. Check the continuity status when the ASC OFF switch is
pressed and when the switch is released.
ACA02711AB
1
2
Removal steps
1.
Under cover (Refer to GROUP 52A
−
Instrument Panel Assembly
.)
2.
ASC OFF switch
Item
When the ASC
OFF switch is
released (Not
being
operated)
When the ASC
OFF switch is
pressed
Continuity between
terminal No. 1 and
No. 2
No continuity
Continuity
exists (2
Ω
or
less)
Continuity between
terminal No. 3 and
No. 4
Continuity
exists
Continuity
exists
ACA01062AB
MSB-20EXML35-501(20AB039)
8
<Deleted>
<Deleted>
16.
17.
<Changed>
Attached sheet 5 (2/2)
