En-6
E
CONO COOL OPERATION
Press
during COOL mode
page 4
to start
ECONO COOL operation.
The unit performs swing operation vertically in various cycles according
to the temperature of airflow. Set temperature is set 2°C higher auto-
matically.
Press
again to cancel ECONO COOL operation.
• ECONO COOL operation is cancelled when the VANE or POWERFUL
COOL button is pressed.
What is “ECONO COOL”?
Swing airfl ow (change of airfl ow) makes you feel cooler than stationary airfl ow. So,
even though the set temperature is automatically set at 2°C higher, it is possible to
perform cooling operation with keeping comfort. As a result, energy can be saved.
T
IMER OPERATION (ON/OFF TIMER)
P
OWERFUL COOL OPERATION
Press
during COOL mode
page 4
to start
POWERFUL COOL operation.
Fan speed
: Exclusive speed for POWERFUL mode
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL COOL operation.
Press
again to cancel POWERFUL COOL
operation.
• POWERFUL COOL operation also is cancelled automatically in 15
minutes, or when the OFF/ON, FAN, or ECONO COOL button is
pressed.
1
Press
or
during operation to set the timer.
(ON timer) : The unit turns ON at the set
time.
(OFF timer) : The unit turns OFF at the set
time.
*
or
blinks.
* Make sure that the current time is set correctly.
Page 3
2
Press
(Increase) and
(Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
• Set the timer while
or
is blinking.
3
Press
or
again to cancel timer.
Note:
• ON and OFF timers can be used in combination. mark indicates the order
of timer operations.
• If power failure occurs while ON/OFF timer is set, see
page 4
“Auto restart
function”.
JG79Y165H02_en.indd 6
2016/12/20 19:01:01
