6
®§,{4/3z|
¯
[5z//,z,{4/3z|0,/z{,x,{/z/,z,{4/3z|04|4+/4/z0,}3/,4{,0z/,z|/{z++,{
®{|3|~§\§¤¤
±§\²
±§¤¤²
Press the [ON/OFF] button.
The ON/OFF lamp will light up in
green, and the operation will start.
Press the [ON/OFF] button again.
The ON/OFF lamp will come off, and
the operation will stop.
¯
§,{4/3z|}/4/}0,0z{
Remote controller setting
Operation mode
Operation mode before the power was turned off
Preset temperature
Preset temperature before the power was turned off
Fan speed
Fan speed before the power was turned off
¯
,//45+,{,},//,0,{4/{,{4|~,
Operation mode
Preset temperature range
Cool/Dry
19 – 30 ºC
Heat
17 – 28 ºC
Auto
19 – 28 ºC
Fan/Ventilation
Not settable
Note:
1,|3xz{,}}/,§\§¤¤5//z|300,34/,+4x/,{}//3|~z|/,z,{4/3z|3}{z~{,}}/,43{z|3/3z|,{3++|z/}/4{/xz{45z/®
03|/,}
3}3}/z{,,|//,3|/,{|4+z0z|,|/}x{z05,3|~404~,
®z, ,+,/3z|
Press the [F1] button to go through the op-
eration modes in the order of “Cool”, “Dry”,
“Fan”, “Auto”, and “Heat”. Select the desired
operation mode.
» Operation modes that are not available to
the connected indoor unit models will not
appear on the display.
)|xz{04/3z|xz{0+/3}}/,043{z|3/3z|,{Ǥ/zz{
|3/³´},{3,}¬
q +/3}}/,043{z|3/3z|,{«§/zz{|3/³´},{3,}¬4|z|-
|,//zz{0z{,3|zz{|3/}3/z|,z/zz{|3/[z{3|~
/z/,443/z{0z{,|3/}4|z,{4/,}30+/4|,z}+
»¼ 88½ ¢¾ -
multaneously, one for the cooling and the other for heating, the opera-
tion mode of the indoor unit that operates earlier is selected. The other
indoor units that will start the operation later cannot operate, indicating
an operation state in blinking.
In this case, please set all the indoor units to the same operation
mode.
»¨©; $¢ © ²¡¿¨Àµ
mode. Cannot change over to the operating mode (COOL HEAT) and
becomes a state of standby.
» ¼ ¢ A © A
unit is being done, it takes a few minutes (max. about 15 minutes) to
blow out the warm air.
»£ © $© 8
© ¢ A A© ¯¢ © 8 ; $ 8
A 6 ¨ A© 8 ¯¢
into it.
[/z04/3z,{4/3z|
§
According to a set temperature, cooling operation starts if the room
temperature is too hot and heating operation starts if the room tem-
perature is too cold.
§
During automatic operation, if the room temperature changes and
remains 2 °C or more above the set temperature for 15 minutes, the
air conditioner switches to cooling mode. In the same way, if the room
temperature remains 2 °C or more below the set temperature for 15
minutes, the air conditioner switches to heating mode.
Cooling mode
15 minutes (switches
from heating to cooling)
Set tempe2 °C
Set temperature
15 minutes (switches
from cooling to heating)
Set temperature -2 °C
F1
F2
F3
F4
Cool
Room
Auto
Set temp.
Mode
Temp.
Fan
Fri
Cool
Dry
Fan
Auto
Heat
¦4//,5+3|23|~0z,3z|0,4|}
The mode icon will blink when other indoor units in the same refriger-
ant system (connected to the same outdoor unit) are already operated
in a different mode. In this case, the rest of the unit in the same group
can only be operated in the same mode.
