Mitsubishi Electric Mr.SLIM PEAD M125JAL2, Operation Manual

Page: 5 / 20

5
2. Parts Names
Display
The main display can be displayed in two different modes: “Full” and “Basic”. The factory setting is “Full”. To switch to the “Basic” mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
<Basic mode>
②
①
⑤
⑥
⑦
⑧
⑨ ⑩
⑪
③
⑲
④
㉒
⑳
㉔
㉓
㉑
⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱ ②
④
③
①
⑤
㉔
㉓
▌ ① Operation mode
Indoor unit operation mode appears here.
▌
②
Preset temperature
Preset temperature appears here.
▌
③
Clock (See the Installation Manual.)
Current time appears here.
▌ ④ Fan speed
Fan speed setting appears here.
▌
⑤
Button function guide
Functions of the corresponding buttons appear here.
▌ ⑥
Appears when the ON/OFF operation is centrally controlled.
▌
⑦
Appears when the operation mode is centrally controlled.
▌
⑧
Appears when the preset temperature is centrally controlled.
▌ ⑨
Appears when the filter reset function is centrally controlled.
▌
⑩
Indicates when filter needs maintenance.
▌
⑪
Room temperature (See the Installation Manual.)
Current room temperature appears here.
▌
⑫
Appears when the buttons are locked.
▌
⑬
Appears when the On/Off timer, Night setback, or Auto-off timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
▌
⑭
Appears when the Weekly timer is enabled.
▌ ⑮
Appears while the units are operated in the energy-save mode. (Will
not appear on some models of indoor units)
▌ ⑯
Appears while the outdoor units are operated in the silent mode.
▌
⑰
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature (
⑪
).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
▌
⑱
Indicates the vane setting.
▌ ⑲
Indicates the louver setting.
▌
⑳
Indicates the ventilation setting.
▌
㉑
Appears when the preset temperature range is restricted.
▌ ㉒
Appears when an energy-saving operation is performed using a “3D
i-See sensor” function.
▌ ㉓ Centrally controlled
Appears for a certain period of time when a centrally-controlled item is
operated.
▌
㉔
Preliminary error display
An error code appears during the preliminary error.
Most settings (except ON/OFF, mode, fan speed, temperature) can be
made from the Menu screen.