En-7
● OPERATING INSTRUCTIONS ●
W
EEKLY TIMER OPERATION
• A maximum of 4 ON or OFF timers can be set for individual days of the week.
• A maximum of 28 ON or OFF timers can be set for a week.
Setting the weekly timer
* Make sure that the current time and day are set correctly.
1
Press
to enter the weekly timer setting mode.
2
Press
and
to select setting day and number
.
3
Press
,
, and
to set ON/OFF, time, and temperature.
E.g. : [ON], [6:00]
and [24°C] are
selected.
Pressing
selects ON/OFF timer.
Pressing
deletes timer setting.
Pressing
adjusts the time.
Pressing
adjusts the tem-
perature.
Press
and
to continue setting the timer for
other days and/or numbers.
4
Press
to complete and transmit the weekly timer setting.
Note:
• Press
to transmit the setting information of weekly timer to the indoor
unit. Point the remote controller toward the indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
does not have to be pressed per each setting. Press
once af-
ter all the settings are complete. All the weekly timer settings will be saved.
• Press
to enter the weekly timer setting mode, and press and hold
for 5 seconds to erase all weekly timer settings. Point the remote
controller toward the indoor unit.
5
Press
to turn the weekly timer ON. (
lights.)
* When the weekly timer is ON, the day of the week whose timer setting
is complete, will light.
P
ress
again to turn the weekly timer OFF. (
goes out.)
Note:
The saved settings will not be cleared when the weekly timer is turned OFF.
Checking weekly timer setting
1
Press
to enter the weekly timer setting mode.
*
blinks.
2
Press
or
to view the setting of the particular
day or number.
Press
to exit the weekly timer setting.
Note:
When all days of the week are selected to view the settings and a different
set-
ting is included among them,
will be displayed.
* Hold down the button to change the time quickly.
*
which was blink-
ing goes out, and the
current time will be
displayed.
*
blinks.
Note:
The simple ON/OFF timer setting is available while the weekly timer is on. In
this case, the ON/OFF timer has priority over the weekly timer; the weekly timer
operation will start again after the simple ON/OFF timer is complete.
Pressing
selects the day of
the week to be set.
Pressing
selects
the setting number.
E.g. : [Mon Tue ... Sun]
and [1]
are selected.
* All days can be selected.
SG79F400H03_en.indd 7
2009/11/19 17:23:23
