No alteration
Forbidden
Earth
Use
proper tools
Return to
as it was
Replace
Obey the law
No wet hands
Don’t touch
Check
Return to
as it was
WARNING
Remove the power plug
from the socket.
When replacing parts,
use the specified parts
listed on the parts catalog.
Failure to do so may cause electric shock or injuries.
Failure to do so may cause combustion,
smoke, and/or malfunction,
Comply with the law.
Follow the applicable laws and regulations,
such as “Fire Prevention Ordinance” and
“Electric Equipment Technical Standards.”
Failure to do so may cause fire and electric shock.
Earth the product which
requires earthing correctly.
Incomplete earthing or connection to
a gas pipe, water pipe, etc.
may cause an explosion or electric shock.
Replace the damaged or
deteriorated power cord or
lead wire.
Failure to do so may cause fire,
combustion, and/or electric shock.
Do not damage or process
the power cord or lead wire.
This may cause fire, combustion,
and/or electric shock.
Use appropriate tools.
Failure to do so may result in
an accident caused by contact failure
or loose parts.
Do not alter the product.
This may cause fire, electric shock,
and/or injuries.
Do not touch a rotating object
until it completely stops.
The rotating object may
catch your hand etc,
and result in injuries.
Check the wiring diagram
before wiring processing.
Failure to do so may cause combustion,
generation of smoke, and/or malfunction.
Do not work
with wet hands.
This may cause electric shock.
After the work,
lay the wire out as it was before.
Failure to do so may cause combustion,
generation of smoke, and/or malfunction.
WARNING
CAUTION
Mishandling may result in minor or damage to your home or property etc.
Mishandling may result in fatal or serious injury, or fire.
Forbidden
Always follow the
instructions
Alert
Meanings of graphic symbols are explained below.
The following precautions should be observed in order to perform disassembly and reassembly safely and correctly.
The following diagrams indicate circumstances where danger can result from mishandling the unit.
Unplug
13. Precautions for Disassembly and Reassembly
22
Summary of Contents for MJ-E14CG-S1-IT
