42
OPERATING PROCEDURE
PHOTOS
Photo 11
Photo 13
Photo 10
Photo 12
Screws of the damper lock motor (Right)
Lead wires of the damper motor
and the damper lock motor
Screw of
the motor band
Screw of the
earth wire
Screws of the
damper motor
Screw of the
damper motor
support
Screws of the
damper
lock motor (Left)
Screw of the damper
motor support
6. Removing the damper lock motor, the damper
motor and the damper limit switch
(1) Remove the panel. (Refer to 1.)
(2) Remove the screws of the nozzle assembly (lower).
(3) Remove the drain hose from the nozzle assembly (lower)
and pull out the nozzle assembly (lower) toward you.
(4) Remove the tape fixing the lead wires of the damper
motor and the damper lock motor from the nozzle assem-
bly <lower>.
(5) Remove the screws of the damper lock motor.
(6) Lift the nozzle slightly and remove the lock shaft from with
in the nozzle and remove the damper lock motors (ML1,
ML2).
(7) Remove the screws of the damper motor support, and
then the damper motor support.
(8) Remove the screws of the damper motor, and then the
damper motor from the damper motor support.
(9) Disconnect the connector from the damper motor.
(10) Remove the damper limit switches (LS1, LS2).
7. Removing the indoor fan motor (lower)
(1) Remove the panel. (Refer to 1.)
(2) Remove the nozzle assembly (lower) and the drain hose.
(Refer to 6.)
(3) Remove the screw of the earth wire of the indoor fan
motor (lower), and then the earth wire.
(4) Remove the screw of the motor band, and then the motor
band.
(5) Remove the line flow fan and the indoor fan motor (lower)
from the box.
Screw of
the nozzle
Screw of
the nozzle
Drain
hose
Photo 9
OB409E