Mitsubishi Electric MELSENSOR MELSEC iQ-R MH11H01A0LNA, User Manual

Page: 17 / 80

1 BEFORE USING THE PRODUCT
1.2 Handling of Laser Products
15
1
1.2
Handling of Laser Products
JIS/IEC/GB
A semiconductor laser is used as the beam source of the sensor.
The laser class is classified based on the JIS (JIS C 6802: 2014), IEC (IEC 60825-1: 2014), and GB standards (GB 7247.1:
2012).
*1 MH11H01A2  NA: 0.3mW
Before handling laser products, read "Precautions for using laser products" in safety precautions carefully.
■
Caution
• Please consult your local Mitsubishi representative if the product breaks down.
• Do not use the product in a way other than specified in this manual. Users may be exposed to hazardous laser radiation if
the device is controlled or adjusted in procedures not specified in this manual.
• Before use, carefully read the content of the warning labels shown below. The warning label is posted on the side surface of
the sensor head. Use the warning label including in the sensor head packaging as needed.
Class Maximum
output Wavelength Model name
1 0.1mW
*1
658nm MH11H01A  NA
2 1mW 658nm MH11H03B0  NA, MH11H05B0  NA, MH11H08B0  NA, MH11H11B0  NA, MH11H35B0  NA
3R 5mW 658nm MH11H05C0  NA, MH11H08C0  NA, MH11H11C0  NA, MH11H35C  NA