[5. Monitor/Operation ]
23
[3] Status of icons
The following icons will be displayed on the LCDs and Web browsers.
(1) Air conditioner group
ON
OFF
Error
Filter sign
*1
Interlocked LOSSNAY ON
*2, *3, *7
Interlocked LOSSNAY OFF
*3, *7
Schedule set
*5
Schedule disabled
Energy-saving ON
*4,*12
Night setback mode
*10
Starting up
*11
Occupied/Vacant
*5, *6, *7
Bright/dark
*8, *9, *10
Room temperature
*12, *13
Humidity
*12, *13
(Blue)
(Gray)
(Yellow)
(Gray)
(Red)
(Blue)
*1: Displayed only on the Web browsers
*2: When LOSSNAY is interlocked with Mr. Slim air conditioner, the “Interlocked LOSSNAY ON” icon is displayed also while only LOSSNAY
is operating.
(Applicable M-NET adapter model: PAC-SF48/50/60/70/80/81MA-E)
*3: When LOSSNAY is interlocked with indoor units in more than one group, LOSSNAY may be running even if the “Interlocked LOSSNAY
OFF” icon is displayed.
*4: The “Energy-saving control” icon is displayed in the following case.
The peak-cut control is performed for the group or the outdoor units connected in the group.
*5: The “Occupied/Vacant” icon is displayed only when [
] (blue), [
] (gray) or [
] (blue/gray) has been selected in “Motion
sensor display” in “Display setting” on the unit information screen or the basic system setting screen of the Web browser for initial setting.
*6: The “Occupied/Vacant” icon is displayed only when an ME remote controller (PAR-U01MEDU/PAR-U02MEDA) provided with a motion
sensor is used for the group.
*7: The “Occupied/Vacant” icon is displayed in priority to the “Interlocked LOSSNAY ON” and “Interlocked LOSSNAY OFF” icons.
*8: This icon is displayed only when [
] (yellow), [
] (gray) or [
] (blue/gray) has been selected in “Brightness sensor
display” in “Display setting” on the unit information screen or the basic system setting screen of the Web browser for initial setting.
*9: The “Bright/dark” icon is not displayed when the remote controller for the group is not provided with an Brightness sensor.
*10: The “Night setback mode” icon is displayed in priority to the “Bright/dark” icon.
*11: If the air conditioner is not recognized after startup, this icon keeps being displayed. Check the connection and group setting of the air
conditioner.
*12: The “Energy-saving control” icon is displayed in priory to the “Room temperature” and “Humidity” icons.
*13: The display and non-display of room temperature and humidity can be switched on the initial setting screen.
Remarks
●
The icons of the air conditioner group can be displayed not only in four directions, but also in two
directions or in a suspended style. The icon display type can be set on the group setting screen.
