3. Setting
19
3.2 Setting menu 1: Basic Settings (Setting the Phase Wire System, Display Pattern,
VT/Direct Voltage, CT Primary Current, etc.)
In the case of use only by the Setting menu 1, please go to “5. Operation” (from page 38).
In the case to use additional functions, please go to “Setting Menus 2 - 8” (from page 20).
Note
If the contents in the setting menu 1 are changed, the maximum value, minimum value,
demand value of related measurement items will be reset.
(However, active energy will not be reset.)
For detail, refer to section 3.11.
SET
DISPLAY
SET
Set the frequency.
⑤
Frequency
50Hz
60Hz
Note1.The scale value of the frequency of the bar graph display
is changed, too.
Set the time constant for current demand.
(For the demand time period, refer to page 43.)
Note) Even when the display pattern not display the current demand, this screen
appears. If the current demand is not necessary, press the as it is.
⑥
Time constant
for current demand
SET
0 s
10 s
20 s
30 s
40 s
50 s
1 min
2 min
3 min
4 min
5 min
6 min
7 min
8 min
9 min
10 min
15 min
20 min
25 min
30 min
According to the setting flow (page 14), save the changed
contents, or continue to the other setting menu.
Setting Menu
