Mitsubishi Electric MAC 10, Installation Manual

Page: 3 / 26

2
GB
Safety precautions
General
– Check the delivery for transport damage. If
damage is found, advise your supplier.
– The product fulfils the requirements of
article 4 of EMC directive 89/336/EEC.
– Do not use the product in an explosive envi-
ronment.
– Modifications, changes and additions to the
product are forbidden.
– Use only spare parts approved by
Mitsubishi Electric Europe B.V.
– Read the user instructions carefully before
use.
– This equipment should only be operated by
qualified personnel.
At installation
– The product is constructed for stationary
installation.
– Install the product according to the accompa-
nying installation instructions.
– The product must be grounded according to
the accompanying installation instructions.
– This equipment must be installed by quali-
fied personnel.
– High voltage, signal and supply cables must
be separated.
– The product should not be mounted in direct
sunlight.
In use
– Keep the equipment clean.
– Emergency stop and other safety functions
should not be controlled from the terminal.
– Do not touch the keys, displays, etc. with
sharp objects.
Mac10eng Seite 2 Freitag, 5. Februar 1999 3:29 15