Mitsubishi Electric M4 Social, User'S Operation Manual

Page: 68 / 102

CONFIDENTIAL Mitsubishi Electric
Page 68/ 102
.
5.6 CONFERENCE CALLS MANAGEMENT
A conference call is initiated by a first Join operation between an active and a held call. The result is a conference
call with two remote participants.
F F F F
Note : the number of remote parties in a conference is limited to 5. Making a conference call is submitted to
your subscription options and depends on network services capabilities.
5.6.1 CONFERENCE CALL: DISPLAY
L2
✆
..
✆
Conference
2 users
Names Menu
Conference call screen:
- A graphic drawing indicates the call situation
– The label Conference with the number of participants
– The "Off-hook" icon indicates that calls are connected
–Two softkeys (
Names
and
Menu
) allow access to the quick ADN and main menu
- The icon status bar gives all information related to the call state (Line 2, EFR, call not
enciphered (operator specific), etc..)
5.6.2 CONFERENCE CALL: "OPTIONS" MENU
5.6.2.1 "O
PTIONS
" M
ENU CONTENT
Press
Actions
key to access to conference call related operations menu:
Item Function
AutoDtmf To enter a DTMF string and send it, available only if the call is active:
- This item allows you to enter a DTMF string and send it to the remote party,
- The string can be entered directly or can be selected from the memories,
- A waiting screen is displayed during the DTMF transmission,
- The DTMF string is sent to all the remote parties
Private with This item allows making a private conversation with one of the conference participants, putting all
other participants on hold. See description below.
The item is hidden if the conference is in held state.
Same actions as the sequence
2 x SEND
Hold | Retrieve To put the conference call on hold or retrieve it.
The same behaviour as for a single call is applied to the conference call
Another way is to press
SEND
to hold or retrieve the conference.
Mute | Unmute To Mute or unmute the micro (same actions as a long press on the key)
End_X Allows ending a call with one of the participants. See description below.
End All
Allows ending the conference call (Same actions as a press on the
END
key).