CONFIDENTIAL
Mitsubishi Electric
Page 18/
102
.
2.
MOBILE SWITCHING ON AND OFF
2.1
MOBILE SWITCH-ON BY THE USER
To switch the phone on, press and hold the
Power
key. The "
AUDIO_POWER_ON_TONE
" tone is played if the alert
mode is not "Vibrate only", otherwise a short vibrator activation is performed.. Before the mobile becomes ready
for use, the following operations sequence takes place. It is called the "Power On" sequence.
Self check screen:
The whole screen is blacked. The mobile performs various controls on internal components.
"End of tests"
Enter phone lock:
|
Phone lock entry screen:
A password editor is entered
If the phone lock code is set, it is requested at this stage.
The phone lock code is a 4-digit numeric code.
In case of error, you have an infinite number or trials.
"1234"
Phone lock code entry
You can also enter the international emergency number 112 that will be called in this case
During the call, no other phone feature is available. After the end of the call, the phone returns to
the lock code sequence request with an empty entry.
Enter phone lock:
****|
Ok
Clear
Phone lock entry screen:
Press
Ok.
softkey to validate the lock code
Press
Clear
softkey to erase the last character. Long Press
Clear
softkey to erase whole
entry
Ok
Phone lock code validation
Enter PIN:
|
PIN entry screen:
A password editor is entered.
If the PIN control is active on SIM, it is requested at this stage.
The PIN code is a 4-digit to 8-digit number.
The behaviour when entering a PIN is described in Annex B.
"0000"
PIN entry
You can also enter the international emergency number 112 that will be called in this case
During the call, no other phone feature is available. After the end of the call, the phone returns to
the PIN sequence request with an empty entry.
