1
Lubrication (1)
Fill the oil reservoir with oil up to “H” mark.
Oil level should be periodically checked. If oil level
is found below “L” level replenish oil to “H” level.
For oil, use “MC70M” specified by Mitsubishi.
※ Refer
MC70M ：Specific gravity (15℃ ) = 0.86 (g/cm
3
)
：Viscosity (40℃ ) = 10.9 (mm
2
/s)
2
Lubrication (2)
When a new sewing machine is used for the
first time, or sewing machine left out of use for
considerably long time is used again, replenish a
suitable amount of oil to the portions indicated by
arrows in the below figure.
USAGE PRECAUTION
Oil level mark
Pressure bar
— 2 —
Summary of Contents for LT2-2250-B1T
Page 28: ...Printed in Japan ...
