Mitsubishi Electric LDT651L Operation Manual Download Page 27

Page: 27 / 30

MAIL (RECIPIENT)

This screen allows you to specify the recipients of the e-mail
sent periodically or when the monitor has an error.

RECIPIENT E-MAIL ADDRESSES

Specify the e-mail addresses to send error noti

cation e-mail

to.

CONDITION

Specify the conditions to send mails.
When you check PERIODICAL, specify the date and time to
send the mails in the PERIODICAL setting.

CONFIRMATION

Sends test e-mail.
This allows you to con

rm that the e-mail settings are

con

gured properly.

Attach the log

le to a TEMPERATURE/HARDWARE error

e-mail

When this option is checked, a log is added to the mail which
noti

es a temperature or status error.

TIPS

• The RECIPIENT E-MAIL ADDRESSES can be up to 64

alphanumeric characters or symbols.

Controlling the Monitor with a PC (LAN)

MAIL (PERIODICAL)

When PERIODICAL for CONDITION of MAIL (RECIPIENT) is
checked, set the date and time to send the mail.

DAY OF THE WEEK

Specify the day of the week to send the periodical mails.

TIME

Specify the time of the day to send the periodical mails.

Caution

• Do not turn off the main power when you set to send the

periodical mails.

• Specify the correct date and time. (See page 7.)

If the date and time settings are incorrect, the periodical
mail is not sent properly.

• Regularly con

rm that the speci

ed date and time is

correct.

Summary of Contents for LDT651L































Search results

Summary of Contents for LDT651L

Reviews:

Related manuals for LDT651L

Brands by name

Popular brands

Mitsubishi Electric LDT651L, Operation Manual

Search results

Summary of Contents for LDT651L

Reviews:

Related manuals for LDT651L

Brands by name

Popular brands