Mitsubishi Electric Lancer Evolution-VII, Workshop Manual

Page: 587 / 1449

SRS - Air Bag Modules and Clock Spring
52B-56
A
B
"
STEERING WHEEL REMOVAL
A
C
"
CLOCK SPRING REMOVAL
Caution
Keep the removed clock spring in a clean and dry place.
A
D
"
COVER REMOVAL
Use the special tool to insert into the notch as shown in
the illustration and remove the cover.
A
E
"
STEERING WHEEL-DRIVER’S AIR BAG MODULE
ASSEMBLY REMOVAL
1. By sliding the A section (in the figure) of the clock spring
connector in the arrow direction, disconnect the connector.
2. Insert the hexagonal bit socket into the arrow section
in the figure. Completely loosen the bolt, and then remove
the steering wheel-driver’s air bag module assembly.
NOTE
Use a hexagonal bit socket or a hexagonal wrench having
an effective length of 75 mm or more in the hexagonal
section and the diameter of 8 mm or more.
MB990803
MB990784
A
Clock spring connector
Steering wheel-driver’s air bag
module assembly
Hexagonal bit
socket