─
4
─
2. Features
Make sure that the product operates properly upon completion of repair. Clean the product and the surrounding
area, and then notify the customer of the completion of repair.
Notes for servicing
●
Before repairs, take the product off the wall.
●
Inspect the grounding condition, and repair it if it is incomplete. Make sure that a circuit breaker or an overload
protection device is installed, if it is not installed, recommend the customer to install one.
●
Check whether the filter is installed securely in place.
●
Do not leave a towel or other objects in the hand-drying area.
●
Never place any objects on the main body nor cover it.
●
Make sure that the product is not being used in any of the following locations:
• Outdoors
• Locations where the temperature could be lower than 32°F (0ºC)
• Locations where the temperature could be higher than 104°F (40ºC)
• Locations where there is a lot of dust
• Locations where there is a lot of condensation
• Locations where salt damage may occur
• In vehicles (including ships and airplanes)
• Locations where corrosive, neutral, or reductive gases are present (This may shorten the working life of the
unit and/or cause malfunctions.)
• Near food or tableware
• Kitchens (Where there is a risk of water splashing)
• Locations where the product may come into direct contact with water
• Locations where the product is in direct sunlight or strong light (It may cause sensor malfunction)
• Rooms that have a sterilization basin, swimming pools, or bathrooms
• High speed drying with low energy use and quiet operation
• Robust, tamper-resistant body
• Quick 0.1 second response time improves user experience.