16
(6) Fasten the bus connection unit by tightening the board fixing screws (2
places) with the tightening torque of 0.36 to 0.48 N•m.
(7) When installing an extension unit on the unit that has been installed,
remove the connector cover and the sticker.
When not installing an extension unit on the unit that has been installed,
in order to avoid receiving electrostatic, stick accessory stickers to cover
the top of mounting screws (4 places).
Keep the connector cover fixed.
Keep the sticker stuck as it is.
Point
Remove the screws that fixes the extend interface relay board before
removing the unit.(Above 6))
5)
6)
Sticker
Accessory sticker
Accessory sticker
Connector cover
Summary of Contents for GT15V-75R1
Page 25: ...17 MEMO ...
