Mitsubishi Electric GT14, User Manual

Page: 855 / 1546

32
CONNECTION T
O
IAI
ROBOT CONTROLL
ER
33
CONNECTION T
O
OMRON PL
C
34
CON
N
EC
TION
T
O
OMR
O
N TEMPER
AT
UR
E
C
O
NT
RO
LLER
35
CON
N
E
C
T
ION T
O
KE
Y
EN
C
E PL
C
36
CONNECTION
T
O
KO
Y
O
EI
P
LC
37
C
O
NNECTION T
O
JT
EK
T
P
L
C
38
CONNECTION T
O
SHARP PL
C
39
CONNECTI
O
N T
O
SHINKO
TE
CHNO
S INDICA
TI
NG
CONTROL
LER
35. CONNECTION TO KEYENCE PLC
35.3 Ethernet Connection
35 - 21

Ethernet setting
*1 Each of [GOT PLC No.] set in the communication detail
setting and [PLC No.] set in the Ethernet setting must be set
to different station numbers.
35.3.2  Communication detail settings
POINT POINT POINT
(1) Communication interface setting by Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
11. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
35.3.3 PLC side setting
POINT POINT POINT
KEYENCE PLC
For details of KEYENCE PLC, refer to the following
manual.
KEYENCE PLC user's Manual

Setting of KV-LE21V/LE20V
Set the IP address and port No. by the unit editor of KV
STUDIO.
*1 Adjust the settings with the Ethernet settings of the GOT
side.
35.3.2  Ethernet setting
Item Description Set value
Host
The host is displayed. (The host is
indicated with an asterisk (*).)
-
N/W No.
Set the network No. of the
connected Ethernet module.
(Default: blank)
1 to 239
PLC No.
*1
Set the station No. of the
connected Ethernet module.
(Default: blank)
1 to 254
Controller Type KEYENCE (fixed)
KEYENCE
(fixed)
IP Address
Set the IP address of the
connected Ethernet module.
(Default: 192.168.0.10)
PLC side IP
address
Port No.
Set the port No. of the connected
Ethernet module.
(Default: 8501)
PLC side port No.
Communication
UDP, TCP
(Default: UDP)
Adjust the settings
with the PLC
settings.
Item Description Range
Communication
mode
Ethernet -
IP Address
*1
Set the IP address.
0.0.0.0 to
255.255.255.255
Port No.
*1
(Host link)
Set the port No. 256 to 65534