This manual confers no industrial property rights or any rights of any other
kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation
cannot be held responsible for any problems involving industrial property rights
which may occur as a result of using the contents noted in this manual.
Warranty
Exclusion of loss in opportunity and secondary loss from warranty liability
Regardless of the gratis warranty term, Mitsubishi shall not be liable for
compensation to:
(1) Damages caused by any cause found not to be the responsibility of
Mitsubishi.
(2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi
products.
(3) Special damages and secondary damages whether foreseeable or not,
compensation for accidents, and compensation for damages to products
other than Mitsubishi products.
(4) Replacement by the user, maintenance of on-site equipment, start-up test run
and other tasks.
For safe use
This product has been manufactured as a general-purpose part for general
industries, and has not been designed or manufactured to be incorporated in
a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric
power, aerospace, medicine or passenger movement vehicles, consult with
Mitsubishi Electric.
This product has been manufactured under strict quality control. However
when installing the product where major accidents or losses could occur if the
product fails, install appropriate backup or failsafe functions in the system.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
3.2 Performance Specifications
Item
Specifications
GT1155HS-QSBD
GT1150HS-QLBD
Display
section
*1
Type
STN color liquid crystal
STN monochrome (white/black) liquid crystal
Screen size
5.7"
Resolution
320
240 dots
Display size
W115(4.53)
H86(3.39)[mm](inch)
Display character
16-dot standard font: 20 characters
15 lines, 12-dot standard font: 26 characters
20 lines
Display color
256 colors
Monochrome (white/black), 16 scales
Contrast adjustment
16-level adjustment
Intensity of LCD only
380[cd/m
2
](Adjustable in 8 levels)
220[cd/m
2
](Adjustable in 8 levels)
Intensity adjustment
8-level adjustment
Life
Approx. 50,000h. (Time for display intensity to become 1/5 at operating ambient temperature of 25
C)
Backlight
Cold cathode fluorescent tube (irreplaceable by a user) backlight shutoff detection function is included.
Backlight off/screen saving time can be set.
Life
*2
Approx. 75,000h or longer (Time for display intensity reaches
50% at the operating ambient temperature of 25
C)
Approx. 54,000h or longer (Time for display intensity
reaches 50% at the operating ambient temperature of 25
C)
To u c h
panel
Number of touch keys
300 keys/screen (Matrix structure of 15 lines
20 columns)
Key size
Minimum 16
16 dots (per key)
N u m b e r o f p o i n t s t o u c h e d
simultaneously
Maximum of 2 points
Life
1 million times or more (operating force 0.98N max.)
Memory
C drive
*3
Flash memory (Internal), for storing project data (3Mbytes) and OS
Life
(Number of write times)
100,000 times
D drive
SRAM (Internal), 512kbyes (battery backup)
Internal clock Accuracy
-45 seconds, +45 seconds per month
Buzzer output
Single tone (tone length adjustable)
Switch
Operation switch
6 switches (6 contacts/common), N/O contact, Maximum rating 10mA/24VDC, Life: 1,000,000 times
Grip switch
1 switch (single wiring) (IDEC HE3B-M2PB), Enable switch (deadman switch) 3-position system of OFF
ON
OFF
2 N/O contacts, Maximum rating 1A/24VDC (resistance load), Maximum rating 0.3A/24VDC (induction load), Life: 100,000
times
Emergency stop switch
1 switch (single wiring) (OMRON A165E-S-02)
2 N/C contacts, Maximum rating 1A/24VDC (resistance load), Maximum rating 0.3A/24VDC (induction load), Life: 100,000
times
Keylock switch
(2-position switch)
1 switch (single wiring) (IDEC AS6Q-2KT1PB)
2-notch type (Manual stop at each position/A key can be inserted and removed on only the left side./On the right side, a key
cannot be removed./Two keys are provided.)
2-position, Maximum rating 1A/24VDC (resistance load), Maximum rating 0.3A/24VDC (induction load), Life: 100,000 times
LED
POWER LED
1 LED
Lit in green: Power is correctly supplied.
Lit in orange: Screen saving and backlight not lit.
Blinks in orange/green: Blown back light bulb.
Not lit: Power is not supplied.
LED for operation switch display 6 LEDs, green (lighting control from the display section)
LED for grip switch display
1 LED, green (lighting control from display unit part)
Battery
GT11-50BAT lithium battery
Type
Magnesium maganese dioxide lithium primary battery
Backup target
Clock data, alarm history and recipe data
Life
Approx. 5 years (Operating ambient temperature of 25
C), Guaranteed: 1 year
Built-in
interface
RS-422/RS-232
RS422/RS232 1ch
Transmission speed : 115,200/57,600/38,400/19,200/9,600/4,800bps
Connector shape
: Round 32 pins (male)
Application
: PLC communication (Select either RS-422 or RS-232 when used)
RS-232
RS232 1ch
Transmission speed : 115,200/57,600/38,400/19,200/9,600/4,800bps
Connector shape
: MINI-DIN 6 pin (Female)
Application
: PC communication (Project data upload/download, OS installation, transparent function)
USB
USB (Full Speed 12Mbps) 1ch
Connector shape: Mini-B
Application
: PC communication (Project data upload/download, OS installation, transparent function)
CF card
Conforming to PCMCIA, compact flash slot, 1ch
Connector shape : Dedicated for TYPE
Application
: Data transfer, data storage
Option function board
*4
For mounting the option function board, 1ch
Environmental protective structure
*5
Equivalent to IP65F (excluded on the relay connector side of external cable valid when the external cable is connected)
External dimensions
W176 (6.93)
H220 (8.67)
D93(3.67) [mm] (inch)
Weight
1.0kg (Handy GOT main unit only)
*1 • Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is impossible to completely avoid this symptom, as the liquid crystal display
comprises of a great number of display elements. Flickers may be observed depending on the display color.
Please note that these dots appear due to its characteristic and are not caused by product defect.
• Flickers and partial discoloration may be generated on the liquid crystal display panel due to the display contents or the contrast adjustment. However, please note
that these phenomena appear due to its characteristic and are not caused by product defect.
• There is a difference in the display brightness and the color tones between liquid crystal display panels. When using multiple liquid crystal display panels, please note
that there is an individual difference between them.
• A crosstalk (shadow as an extension of the display) may appear on the liquid crystal display panel. Please note that it appears due to its characteristic.
• When the display section is seen from the outside of the display angle, the display color seems like it has changed. Please note that it is due to its characteristic.
Please note that the response time, brightness and color of the liquid crystal display panel may vary depending on the usage environmental temperature.
Especially in the low temperature environment, the display response becomes slow due to the characteristics of the STN liquid crystal.
Please check the display response in advance for using this product.
• When the same screen is displayed for a long time, an incidental color or partial discoloration is generated on the screen due to heat damage, and it may not disappear.
To prevent heat damage, the screen saver function is effective.
For details on the screen saver function, refer to the following.
GT11 Handy GOT User's Manual
*2 Using the GOT Backlight OFF function can prolong the life of the backlight.
For details on the Backlight OFF function, refer to the following.
GT11 Handy GOT User's Manual
*3 ROM in which new data can be written without deleting the written data.
*4 Necessity of mounting the option function board may differ depending on the hardware version. Refer to the following for details.
GT11 Handy GOT User’s Manual
*5 Note that this does not guarantee all user’s operation environment. The protection is not applied when the interface environment protection cover or environment
protection back cover is removed. In addition, the product may not be used in environments under exposition of oil or chemicals for a long period of time, or in
environments filled with oil-mist.
3.3 Power Supply Specifications
*1 The GOT continues to operate even upon 5ms or shorter instantaneous power failure.
The GOT stops operating if there is extended power failure or voltage drop, while it automatically resumes operation as soon as the power is restored.
3.4 External Dimensions
Compatible software package
GT Designer2 Version2.15R or later/GT Designer3 Version1.01B or later
Item
Specifications
GT1155HS-QSBD
GT1150HS-QLBD
Input power supply voltage
24V DC (+10% -15%), ripple voltage 200mV or less
Fuse (built-in, not exchangeable)
1.0A
Power consumption
9.84W (410mA/24V DC) or less
9.36W (390mA/24V DC) or less
At backlight off
4.32W (180mA/24V DC) or less
Inrush current
15A or less (26.4V) 2ms
Permissible instantaneous power
failure time
*1
Within 5ms
Noise immunity
Noise voltage: 1000Vp-p, Noise width: 1
s (by noise simulator of 30 to 100Hz noise frequency)
Dielectric withstand voltage
500V AC for 1 minute (across power supply terminals and earth)
Insulation resistance
10M
or larger by insulation resistance tester (across power supply terminals and earth)
Item
Specifications
GT1155HS-QSBD
GT1150HS-QLBD
13 (0.52")
62 (2.45")
176 (6.93")
16 (0.63")
204 (8.04")
209 (8.23")
min 140 (5.52")
168 (6.62")
3.5 (0.14")
74 (2.92")
62 (2.45")
72 (2.84")
50 (1.97")
75 (2.96")
18 (0.71")
Unit: mm (inch)
5 (
0.2")
4. Maintenance and Inspection
The GOT does not include consumable components that will cause the shorten life.
However, note that battery life is 5 years and LCD life is 50,000 hours. The life of
backlight in GT1155HS-QSBD is 75,000 hours and that in GT1150HS-QLBD is
54,000 hours.
It is recommended to replace the battery periodically. (For the replacement of the
liquid crystal screen and backlight, please consult your nearest sales office or FA
Center.)
4.1 Daily Inspection
Daily inspection items
Refer to the following for the model names of the protection sheet or the
replacement procedure.
GT11 Handy GOT User’s Manual
4.2 Periodic Inspection
Yearly or half-yearly inspection items
The following inspection should also be performed when equipment has been
moved or modified or the wiring changed.
4.3 Battery Replacement
The battery backs up clock data, alarm history and recipe data.
Screen data is stored in the flash memory and data is retained even if the battery is
dead.
Battery model name
Handy GOT is shipped with the following battery.
Battery replacement procedure
1) Turn the GOT power off.
2) Loosen the environmental protection back cover screws at four points on GOT
rear face to remove the cover.
3) Remove the old battery from the holder.
4) Disconnect the old battery connector and insert the new battery connector
within 30s.
5) Insert the battery into the holder.
6) Attach the environmental protection back cover and tighten the screws.
Tightening torque: 36 to 48 N
cm
7) Turn the GOT power on.
8) Check if the battery condition is normal with the utility.
Refer to the following for the details of battery status display.
GT11 Handy GOT User’s Manual
No.
Inspection Item
Inspection
Method
Criterion
Action
1
Connec
tion st
atus
Loose terminal
screws
Retighten
screws with
screwdriver
Not loose
Retighten
terminal screws
Proximate
solderless terminals
Visual check
Proper
intervals
Correct
Loose connectors
Visual check
Not loose
Retighten
connector fixing
screws
2
U
sage s
tatu
s
Dirt on protection
sheet
Visual check
Not
outstanding
Replace with
new one
Foreign material
attachment
Visual check
No foreign
matter sticking
Remove clean
No.
Inspection Item
Inspection
Method
Criterion
Action
1
Surrounding
environment
Ambient
temperature
Make
measurement
with
thermometer
or hygrometer
Measure
corrosive gas
0 to 40
C
For use in control
panel,
temperature
inside control
panel is ambient
temperature
Ambient
humidity
10 to 90%RH
Atmosphere
No corrosive
gas
2
Power supply voltage
check
24V DC
Measure
voltage across
terminals.
20.4 to 26.4V
DC
Change supply
power
3
Mounting
status
Looseness
Move module
Should be
mounted
firmly
Retighten screws
Dirt, foreign
matter
Visual check
No dirt,
foreign
matter
sticking
Remove, clean
4
Connection
status
Loose
terminal
screws
Retighten
screws with
screwdriver
Not loose
Retighten terminal
screws
Proximate
solderless
terminals
Visual check
Proper
intervals
Correct
Loose
connectors Visual check
Not loose
Retighten
connector fixing
screws
5
Battery
Check the
system alarm
(error code:
500) report on
the Alarm
Information
screen
(Preventive
maintenance)
Replace with new
battery when the
current battery
has reached the
specified life span,
even if battery
voltage is not
displayed.
Product name
Model name
Battery
GT11-50BAT
Environmental
protection
back cover
screw
Environmental
protection
back cover
screw
RS232
RS422
Battery holder
Connector for battery connection
Battery
Environmental
protection
back cover
screw
Environmental
protection
back cover
screw
How to confirm production year and month
The production year and month of the battery built in the purchased GOT can be
confirmed by the production No. (S/N) marked on the GOT main unit.
The production date of the optional replacement battery can be confirmed by the lot
No. marked on the nameplate (label) affixed on the battery.
Battery life
Approximate battery life:
5 years (ambient temperature: 25
C)
Battery replacement: In 4 to 5 years
Approximate life is 5 years, but life may be shorter depending on the ambient
temperature, therefore, note that the battery must be replaced in 4 to 5 years. Make
sure to purchase a new battery as needed as it self-discharges.
Battery status can be confirmed on a GOT utility screen.
For details of battery status or how to output alarm, refer to the following:
GT11 Handy GOT User’s Manual
5. Cautions on Using Emergency Stop Switch
1) When using the emergency stop switch in the handy GOT, judge the validity to use
the emergency stop switch in accordance with the risk assessment in your system.
2) When using the parallel circuit (which disables the emergency stop status while the
handy GOT is removed), the system may not conform to the safety standards.
Check the safety standards required in the system, and then judge the validity to use
the emergency stop switch.
Notification of CE marking
The following products have shown compliance through direct testing (to the identified
standards) and design analysis (forming a technical construction file) to the European
Directive for Electromagnetic Compatibility (2004/108/EC) when used as directed by
the appropriate documentation.
This product is designed for use in industrial applications
- Type: Graphic Operation Terminal
- Models: GOT series
For more details please contact your local Mitsubishi Electric sales site.
For details of CE marking, refer to the following.
GT11 Handy GOT User's Manual
Standard
Remark
EN61131-2 : 2007
Programmable
controllers - Equipment,
requirements and tests
EMI
Compliance with all relevant aspects of the
standard. (Radiated Emissions)
EMS
Compliance with all relevant aspects of the
standard.
(ESD, RF electromagnetic field, EFTB, Surge,
R F c o n d u c t e d d i s t u r b a n c e s a n d P o w e r
frequency magnetic field)
RS-422
RS-232
Hardware version
GRAPHIC OPERATION TERMINAL
MODEL
IN 20.4
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN
80M1 IND. CONT. EQ
US LISTED
AJ
AJ
26.4VDC POWER 9.84W MAX
GT1155HS-QSBD
*Actual product nameplate differs
from the example shown above.
S/N
1010001
0
1
1 0 0 0
Control number
Year (example: 2010)
Last two digit of year
7-digit
<Jan., 2010 or later>
1
Month (example: Jan.).
1 to 9: Jan. to Sep.,
X: Oct., Y: Nov., Z: Dec.
9 X 0 0 0
Control number
Year (example: 2009)
Last digit of year
6-digit
<Dec., 2009 or before>
Example nameplate
(manufacture's serial number 1010001)
1
Month (example: Oct.).
1 to 9: Jan. to Sep.,
X: Oct., Y: Nov., Z: Dec.
GT11-50BAT
LOT.101
Connector
LOT.
Model name
Nameplate
Year (example: 2010)
Last two digit of year
Month
(example: Jan.)
1 (Jan.) to 9 (Sep.),
X (Oct.), Y (Nov.), Z (Dec.)
1
3-digit
<Jan., 2010 or later>
1
0
Year (example: 2008)
Last digit of year
Month
(example: Oct.)
1 (Jan.) to 9 (Sep.),
X (Oct.), Y (Nov.), Z (Dec.)
8
2-digit
<Dec., 2009 or before>
X
「电器电子产品有害物质限制使用标识要求」的表示方式
Note: This symbol mark is for China only.
含有有害6物质的名称，含有量，含有部品
本产品中所含有的有害 6 物质的名称，含有量，含有部品如下表
所示。
产品中有害物质的名称及含量
本表格依据SJ/T 11364的规定编制。
○:表示该有害物质在该部件所有均质材料中的含量均在GB/T
26572规定的限量要求以下。
×:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/
T 26572规定的限量要求。
部件名称
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴
二苯醚
(PBDE)
显示器
GOT
外壳
○
○
○
○
○
○
印刷基板
×
○
○
○
○
○
背光灯
(CCFL)
○
×
○
○
○
○
电缆
×
○
○
○
○
○
