Mitsubishi Electric GOT SIMPLE GS2107-WTBD, User Manual

Page: 196 / 292

15 - 50
15.8 BACKUP/RESTORE
■1.
Setting password for backup/restore
The password for the backup/restore can be set only when the following condition is satisfied at the first backup.
• When passwords are set for the files for the backup target controller
At the first backup, the password authentication for the controller is required.
The following shows the operating procedure at the first backup.
For details, refer to the following.
➠
15.8.6 Operation of backup/restore
No
No
Start
Touch [Backup] in the main menu on the GOT.
(The first backup)
Is a password set for the
file to be backed up?
Is the password correct?
The file is backed up.
Is there another file?
Is there another controller to
be backed up?
(when with controller list file)
Set the password for the backup/restore.
(Set 32 or less alphanumeric characters
for the password.)
Backup completed
Yes
Yes
No
No
Yes
Is there another unit?
(In the multiple CPU system)
No
Yes
Yes
Input the password for the controller.
(When the password for the first file is verified,
the other files are automatically verified using
the password for the first file. When the
automatic verification fails, input the
corresponding password.)
When a keyword is set,
disable the keyword.
FXCPU
Other than the FXCPU
➠
15.8.6 Operation of backup/restore